MVME162-012A系统模块卡件
线组889R-F4AEA--2直角反射器60-2052 32（1.25英寸）直径反射器92--47光电传感器请访问我们的网站：.ab./catalogs.1--251首选目录。编号以粗体打印。与小孔径传感器一起使用的玻璃纤维光缆第1-2521-257页上的玻璃纤维电缆用于小孔径传感器。接收器小孔径2.2（0.09英寸）直径发射器2.2（0.09英寸）直径。光纤控制尖端2.2（0.09英寸）直径。光纤控制尖端小孔径2.2（0.09英寸）直径。45Fxx--xxxx-xxxx-42GxF-910x小孔径传感器：42SRF-61xx 42SRF-63xx，带61-6374适配器42GTGF--101x0 42xRF--5x00FO，带61-6474适配器42GxF-910x 42KL--L2xxx 42SMF-71xx 45FVL-xxxx45FSL-xxxx注：标称传感距离•由于光纤电缆之间的差异，传感距离可能变化很大•公布的数字基于广泛的测试，并且是保守的•分叉电缆的传感距离用白皮书测量（90%反射率）。其他冲浪可能反射性较低，因此感应距离较短。•传输光束电缆的传感距离是从尖端到尖端测量的•影响距离的应用考虑因素•选择的传感器•目标的反射率•环境•附件，如测距透镜•咨询产品支持以获取更多信息。所示尺寸均为典型尺寸。小孔径传感器用玻璃光纤电缆[2.2（0.09英寸）]安装说明PHOTOSwitcher系列6000通用pt重要事项：保存这些说明以备将来使用。说明6000系列光电传感器在pt pkage中提供可靠的通用感测。Eh 6000系列传感器具有单个输出指示器。透射光束光源具有电源指示器。Eh传感器有一个离合器保护的四圈调节电位计。Eh传感器可配备3米（9.8英尺）四或五根PVC电缆，或在300（12英寸）长电缆（“尾光纤”）末端配备4针或微型快速断开接头。低压传感器具有NPN和PNP输出，输出200ma，用于eh。典型响应为1ms。提供两个/版本。20-132V/传感器提供单个300mA功率MOSFET输出。20-264V/传感器提供单个150mA功率MOSFET输出。所有6000系列传感器的亮操作或暗操作由目录号选择。特点S pt圆柱形封装S多种传感模式S通用电源电压型号S NPN或PNP输出（）一般规格光源红外880nm或可见650nm单位保护反极性、假脉冲电源
Cordset 889R--F4AEA--2 Right Angle Reflector 60--2052 32 (1.25 in.) Diameter Reflector 92--47 Photoelectric Sensors Visit our website: .ab./catalogs. 1--251 Prefer availability cat. nos. are printed in bold. Glass Fiber Optic Cables for use with Small Aperture Sensors The glass fiber optic cables cables on pages 1--2521--257 are for use with small aperture sensors. Receiver Small Aperture 2.2 (0.09 in.) Diameter Transmitter 2.2 (0.09 in.) Dia. Fiber Control Tips 2.2 (0.09 in.) Dia. Fiber Control Tips Small Aperture 2.2 (0.09 in.) Dia. 45Fxx--xxxx--xx 42GxF--910x Small Aperture Sensors: 42SRF--61xx 42SRF--63xx with 61--6374 adaptor 42GTGF--101x0 42xRF--5x00FO with 61--6374 adaptor 42GxF--910x 42KL--L2xxx 42SMF--71xx 45FVL--xxxx 45FSL--xxxx Note: Nominal Sensing Distance • Due to the variation between fiber optic cables, sensing distance can vary widely • The published numbers are based on extensive testing and are conservative • The sensing distance of bifurcated cables is measu with white paper (90% reflectivity). Other surfes may be less reflective and therefore would have shorter sensing distances. • The sensing distance of transmitted beam cables is measu from tip to tip • Application considerations that effect distance • Sensor selected • Reflectivity of target • Environment • cessories such as range extending lenses • Consult with product support for additional information. All dimensions indicated are typical. Glass Fiber Optic Cables Cables for Small Aperture Sensors [2.2 (0.09 in.)]Installation Instructions PHOTOSWITCHr Series 6000 General Purpose pt IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE. Description Series 6000 photoelectric sensors provide reliable general purpose sensing in a pt pkage. Eh Series 6000 sensor has a single output indicator. The Transmitted Beam Light Source has a power indicator. Eh sensor has a clutch-protected four-turn adjustment potentiometer. Eh sensor can be supplied with a 3m (9.8ft) four or five PVC cable or with a 4-pin or micro-style quick disconnect on the end of a 300 (12in) length cable (“pigtail”). Low voltage sensors have both NPN and PNP outputs with 200ma output for eh. Typical response is 1ms Two / versions are available. The 20--132V / sensor offers a single 300mA Power MOSFET output. The 20--264V / sensor offers a single 150mA Power MOSFET output. Light operate or dark operate is selected by catalog number for all Series 6000 sensors. Features S pt cylindrical pkage S Wide selection of sensing modes S Universal supply voltage models S Both NPN or PNP outputs () General Specifications Light Source Infra 880nm or visible 650nm Unit Protection Reverse Polarity, False Pulse Supply
