MVME147-023A工控机器人备件
C带衰减氙闪光灯的喇叭D30 1030V电压代码D30对于beon代码A和B无效（表f）。A10 115125V 60 Hz A20 215250V 50 Hz ef g喇叭类型Beon类型Beon，855XM-H的镜头颜色必须为空白。对于855XM-C，Beon类型和镜头颜色不能为空白。镜头颜色代码描述代码描述代码说明D 116 dB（A）@1 m（3.3 ft），64色调，4级空白无光空白无光A 5 J，闪光灯4 B 10 J，闪光灯5琥珀色7透明84罗克韦尔自动化出版物855-TD001D-EN-P-2016年12月信号规范规范（公告855XM）表107-机械设备下面列出的是855XM喇叭最大冲击和振动标准的参考指南。冲击[G]振动[G]金属喇叭40 3金属喇叭30 3表108-环境属性设备值入口等级喇叭和金属喇叭UL类型4/4X/13/3R，IP66工作存储温度范围电子喇叭表109-材料零件材料外壳（灰色粉末涂层）船用级铝（Al Si12 Cu）螺钉不锈钢Beon透镜聚碳酸酯玻璃透镜罩不锈钢垫圈（盖至底座）O形圈氟硅橡胶UL垫圈（螺钉安装孔）纤维垫圈表110-性能评级设备声音输出@1 m（3.3 ft）SPL数据±3 dB（A）。在最佳电压下测量。音调级的音量控制数金属喇叭116dB（A），最大可调-12 dB（A）64 4光输出（氙频闪灯Beon-光输出cd峰值表111-工作电压和电流消耗装置工作电压标称最大涌入泄漏强度喇叭符合以下要求：ANSI/UL 60079-00-2013 ANSI/UL 60079-15-2013 ISA60079-31-2013表112-闪光频率装置频率喇叭，带1 Hz频闪灯表113-其他属性值电缆入口两个M20x 1.5 three负载孔接线板0.52.5²（2014 AWG）接地螺柱M5表114-ATEX/IECEx认证区域组温度代码855XM危险位置金属角区域2 IIA组（丙烷）IIB组（乙烯）IIC组（氢/乙炔）IIIA组（可燃飞边）IIIB组（非导电粉尘）IIIC组（导电粉尘）855XM-C危险位置金属角子带Strobe区域2IIA组（丙烷）IIB组（乙烯）IIC组（氢气/乙炔）粉尘应用的最高表面温度为855XM CGMxxxDA*和罗克韦尔自动化出版物855-TD001D-EN-P-2016年12月87 855XM音调选择的信号规范音调选择表–选择所需的第一级音调，将音调开关16设置为下表所示的音调设置。该表还显示了如果需要一个以上的音调输出，则哪些第二、第三和第四级音调可用于所选的第一级音调。第1阶段音调编号音调描述音调可视开关第2阶段警报（S2）阶段危险位置金属喇叭855XM-C危险位置金属号角带氙闪光灯Allen-Bradley，控制塔，听。思考。解决。，On-Mhine、Rockwell Automation和Rockwell-Software是罗克韦尔自动化股份有限公司的商标。不属于罗克威尔自动化的商标是其各自公司的财产。出版物855-TD001D-EN-P-2016年12月取代出版物855-TD001C-EN-P-2016年8月版权所有©2016 Rockwell Automation，Inc.。保留所有权利。
C Horn with atthed xenon strobe D30 1030V Voltage code D30 not valid with beon code A and B (Table f). A10 115125V 60 Hz A20 215250V 50 Hz ef g Horn Type Beon Type Beon type and lens color must be Blank for 855XM-H. Beon type and lens color cannot be Blank for 855XM-C. Lens Color Code Description Code Description Code Description D 116 dB (A) @ 1 m (3.3 ft), 64 tones, 4 stages Blank No light Blank No light A 5 J, strobe 4 B 10 J, strobe 5 Amber 7 Clear 84 Rockwell Automation Publication 855-TD001D-EN-P - December 2016 Signaling Specifications Specifications (Bulletin 855XM) Table 107 - Mechanical Device Listed below are reference guidelines for maximum shock and vibration standards for the 855XM horn. Shock [G] Vibration [G] Metal horn 40 3 Metal horn with atthed beon 30 3 Table 108 - Environmental Attribute Device Value Ingress rating Horn and horn with atthed beon UL Type 4/4X/13/3R, IP66 Operating Storage Temperature range Electronic horn Table 109 - Materials Part Material Housing (gray powder coat) Marine grade aluminum (Al Si12 Cu) Screws Stainless steel Beon lens Polycarbonate over glass Lens cage Stainless steel Gasket (Cover to Base) O-ring Fluorosilicone UL Gasket (Screw Mounting Hole) Fiber washer Table 110 - Performance Ratings Device Sound Output @ 1 m (3.3 ft) SPL data ±3 dB(A). Measu at optimum voltage. Volume Control No. of Tones Stages Metal Horn 116 dB(A), max Adjustable -12 dB(A) 64 4 Light Output (Xenon Strobe Beon- Light Output cd peak Table 111 - Operating Voltage and Current Consumption Device Operating Voltage Nominal Maximum Inrush Leakage Iunity Horns ply with the following: ANSI/UL 60079-0-2013 ANSI/UL 60079-15-2013 ISA60079-31-2013 Table 112 - Flashing Frequency Device Frequency Horns with strobe 1 Hz Table 113 - Miscellaneous Attribute Value Cable entry Two M20x 1.5 threaded holes Terminal blocks 0.52.5 ² (2014 AWG) Grounding stud M5 Table 114 - ATEX/IECEx Certification Zone Group Temperature Code 855XM Hazardous Location Metal Horn Zone 2 Group IIA (propane) Group IIB (ethylene) Group IIC (hydrogen/etylene) Group IIIA (bustible flyings) Group IIIB (non-conductive dust) Group IIIC (conductive dust) 855XM-C Hazardous Location Metal Horn with Strobe Zone 2 Group IIA (propane) Group IIB (ethylene) Group IIC (hydrogen/etylene) Maximum surfe temperature for dust applications is for 855XM-CGMxxxDA* and Rockwell Automation Publication 855-TD001D-EN-P - December 2016 87 Signaling Specifications Tone Selection Table for 855XM Tone Selection – To select the requi first stage tone, set the tone switches 16 to the tone setting shown in the following table. The table also shows which 2nd, 3rd, and 4th stage tones are available for use with the selected first stage tone if more that one tone output is requi. Stage 1 Tone No. Tone Description Tone Visual Switch Stage 2 Alarm (S2) Stage Hazardous Location Metal Horn 855XM-C Hazardous Location Metal Horn with Xenon Strobe Allen-Bradley, Control Tower, LISTEN. THINK. SOLVE., On-Mhine, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective panies. Publication 855-TD001D-EN-P - December 2016 Supersedes Publication 855-TD001C-EN-P - August 2016 Copyright © 2016 Rockwell Automation, Inc. All rights reserved.
