MVME147SA自动化模块备件
有关详细重量信息，请参阅PowerFlex 750系列技术数据。90罗克韦尔自动化出版物PFLEX-SG002I-EN-P-与PowerFlex Drive 70 753/755 AFE No HIM（空白板）一起使用的模块说明，20-HIM-A0 LCD显示屏，全数字键盘，20-HIMA3 LCD显示屏，仅限Prograer，20-HIM-15增强型，LCD，全数字小键盘，远程IP66，NEMA 4X/12型−仅供室内使用。包括1202-C30接口电缆（3米/9.8英尺），用于连接驱动器。与PowerFlex Drive 70 753/755 AFE边框电缆套件（带连接器、工具和100米（328英尺）电缆1202-CBL-Kit 100M DPI电缆连接器套件1202-TB-Kit-SET DPI/SCANport）一起使用的人机交互模块（HIM）处理器说明™ 一对二端口分路器电缆1203-S03包括用于连接驱动器的1202-C30接口电缆（3 m/9.8 ft）。仅当HIM用作手持或远程时才需要重新调用。除20-HIM-H10外，还要求总最大距离为10 m（32.8 ft）。PowerFlex 7级和AFE选件空白板20-HIM-A3 20-HIM-A5 20-HIM-A6 20-HIM-C3S 20-HIM-C5S 20-HIM-C6S PowerFlex 7类和AFE选项罗克韦尔自动化出版物PFLEX-SG002I-EN-P-2015年5月91选项套件描述与PowerFlex Drive 70 753/755 AFE Bnet/IP选件模块20-750-BNETIP Bnet®MS/TP RS485适配器-B同轴选件套件电源20-XCO-PS1DPI外部套件20-XCO-BASE外部DPI I/O选项板20-XCO-IO-OPT1 pt I/O模块（3通道）1769-SM1需要一个载体卡（20-750-20CO或20-750-20CO-F1）。有关详细信息，请参阅PowerFlex 750系列腿部适配性。此物品具有银系列状态。仅用于DPI外部套件20-XCO-BASE。PowerFlex 7级和AFE选项92罗克韦尔自动化出版物PFLEX-SG002I-EN-P-2015年5月PowerFlex 750系列腿部适配性大多数腿部适配器（）可与PowerFlex 753/755一起使用。但是，以下所述限制确实适用。框架1-已确认20-750-20CO-F1载体卡只能安装在端口4中。安装此模块后，无法访问端口5。框架2及以上-建议将20-750-20CO载体卡安装在端口6中。使用端口4或5将使相邻的左侧端口与其他选项模块不兼容，并可能干扰网络电缆连接。适配器处理用于I/O连接的端口06（隐式和显式消息传递）处理端口7和更高版本（I/O、显式消息）支持驱动器附加组件支持亚洲语言类型-B Bnet MS/TP不兼容-C ControlNet发布时支持中文、日语和韩语。
Refer to the PowerFlex 750-Series Technical Data for detailed weight information. 90 Rockwell Automation Publication PFLEX-SG002I-EN-P - Modules Description Used with PowerFlex Drive 70 753/755 AFE No HIM (Blank Plate), 20-HIM-A0 LCD Display, Full Numeric Keypad, 20-HIM-A3 LCD Display, Prograer Only, 20-HIM-A5 Enhanced, LCD, Full Numeric Keypad, emote IP66, NEMA Type 4X/12−for indoor use only. Includes a 1202-C30 interfe cable (3 m/9.8 ft) for connection to drive. Human Interfe Module (HIM) cessories Description Used with PowerFlex Drive 70 753/755 AFE Bezel Cable Kit with Connectors, Tools and 100 m (328 ft) Cable 1202-CBL-KIT-100M DPI Cable Connector Kit 1202-TB-KIT-SET DPI/SCANport™ One to Two Port Splitter Cable 1203-S03 Includes a 1202-C30 interfe cable (3 m/9.8 ft) for connection to drive. Requi only when HIM is used as handheld or remote. Requi in addition to 20-HIM-H10 for distances up to a total maximum of 10 m (32.8 ft). PowerFlex 7-Class and AFE Options Blank Plate 20-HIM-A3 20-HIM-A5 20-HIM-A6 20-HIM-C3S 20-HIM-C5S 20-HIM-C6S PowerFlex 7-Class and AFE Options Rockwell Automation Publication PFLEX-SG002I-EN-P - May 2015 91 Option Kits Description Used with PowerFlex Drive 70 753/755 AFE Bnet/IP Option Module 20-750-BNETIP Bnet® MS/TP RS485 Adapter -B Coaxial Option s Kit Power Supply 20-XCO--PS1 DPI External s Kit 20-XCO--BASE External DPI I/O Option Board 20-XCO-IO-OPT1 pt I/O Module (3 Channel) 1769-SM1 Requires a Carrier Card (20-750-20CO or 20-750-20CO-F1). Refer to PowerFlex 750-Series Legy patibility for details. This item has Silver Series status. For use only with DPI External s Kits 20-XCO--BASE. PowerFlex 7-Class and AFE Options 92 Rockwell Automation Publication PFLEX-SG002I-EN-P - May 2015 PowerFlex 750-Series Legy patibility Most legy adapters () can be used with the PowerFlex 753/755. However, the restrictions stated below do apply. Frame 1 - It is recoended that the 20-750-20CO-F1 Carrier Card only be installed in Port 4. Port 5 will not be cessible when this module is installed. Frames 2 and larger - It is recoended that the 20-750-20CO Carrier Card be installed in Port 6. Using Port 4 or 5 will make the adjent left port incessible to other option modules and may interfere with network cable connections. Adapter cesses Ports 06 for I/O Connections (Implicit and Explicit Messaging) cesses Ports 7 and Higher (I/O, Explicit Messaging) Supports Drive Add-on Profi les Supports AsianLanguages Type -B Bnet MS/TP Not patible -C ControlNet Chinese, Japanese, and Korean languages are supported at the time of publication.
