LDMUI-001 模块控制器
钟电流互感器比率电压互感器比率滤波器范围参数值最小值值最大值禁用滤波器系数值最低值值最大值虚拟报警自定义请参阅表虚拟报警基本报警数据结构虚拟报警虚拟报警年月附录装置数据表表配置报警地址长度字描述装置数据格式注释块地址报警启用值报警启用值报警禁用其他值被视为值块地址报警要链接到的变量类型参见连接的变量列表表块地址报警延迟激活值值如果设置值超过允许范围，仪器自动将值设置为块地址报警设置点实际值最小值值最大值如果设置值超过允许范围，仪器自动将该值设置为块地址报警设置点实际值最小值最大值如果设定值超出允许范围，仪器自动将值设置为块地址保留表配置通信地址长度字描述单位数据格式注释时钟格式时钟夏时制值否值是时钟日历年时钟历时钟日历天时钟小时时钟时间分钟时钟时钟秒夏时制增加小时的月份夏时制星期日增加小时当月的最后一个星期日夏时增加小时的月份仅限小时格式夏令时减少小时的月份夏令营减少小时的周日当月的最后一个周日夏令时，减少小时的小时只限小时仪器地址选择值值如果设定值超过允许范围，仪器自动将值设置为波特率选择值:值:值:值:所有其他值均视为值奇偶校验选择价值无奇偶校验价值奇数奇偶校验价值偶数奇偶校验所有其他值都视为值。只有在发送更新时钟后才更新值命令只有在发送更新串行通信设置命令或关闭并打开仪器后，才更新值。年月单元数据表附录表配置模拟输出读写地址长度字描述单元数据格式注释模拟输出参数配置见表模拟输出参数配置自定义表模拟输出配置参数地址长度字描述单位数据格式注释块地址链接到个模拟输出的变量类型块地址个模拟输入的最小电值值值块地址个输出的最大电值块地址个模拟输出的最小输出值值块地址模拟输出的最大输出值块地址保留年月附录单元数据表表配置数字继电器输出读写地址长度字描述单元数据格式注释数字输出通道启用远程报警脉冲数字输出信道输出工作模式仅当选择报警类型时数字输出通道链接报警仅当选择报警型
Clock current transformer ratio voltage transformer ratio filter range parameter value minimum value maximum value disable filter coefficient value minimum value maximum value virtual alarm user-defined see table virtual alarm basic alarm data structure virtual alarm virtual alarm month month appendix device data table configuration alarm address length word description device data format annotation block address alarm enable value alarm enable value alarm disable other values are regarded as value block address message For the type of variable to which the alarm is linked, see the list of connected variables. If the set value exceeds the allowable range, the instrument will automatically set the value to the minimum value of the actual value of the block address alarm setpoint. If the set value exceeds the allowable range, the instrument will automatically set the value to the minimum value of the actual value of the block address alarm setpoint. If the set value exceeds the allowable range, The instrument automatically sets the value as Block Address Reservation Table Configuration Communication Address Length Word Description Unit Data Format Annotation Clock Format Clock Daylight Time Value No Value Yes Clock Day Calendar Year Clock Calendar Day Clock Hour Clock Time Minute Clock Clock Second Daylight Time Increase Hour Month Daylight Time Sunday Increase Hour Last Sunday of the Month Daylight Time Increase Hour Month Limit Hour Format Daylight Time Decrease Hour Month Summer Camp Daylight Saving Time on the last Sunday of the month on which the hours are reduced. The hours are limited to hours. If the set value exceeds the allowable range, the instrument automatically sets the value to the baud rate. Selected value: Value: Value: Value: All other values are regarded as values. Parity check. Selected value: No parity check. Value: Odd parity check. Value: Even parity check. All other values are regarded as values. Update value only after sending the update clock command Update value only after sending the update serial communication setting command or closing and opening the instrument. Month Month Unit Data Table Appendix Table Configuration Analog Output Read Write Address Length Word Description Unit Data Format Annotation Analog Output Parameter Configuration User defined Table Analog Output Configuration Parameter Address Length Word Description Unit Data Format Annotation Block Address Linked to Variable Type Block Address of Analog Outputs Minimum Electrical Value Block Address of Analog Inputs Maximum Electrical Value Block Address of Analog Outputs Minimum Electrical Value Block Address of Analog Outputs Value Value Block Address Maximum Output Value of Analog Output Block Address Retention Month Month Appendix Unit Data Table Configuration Digital Relay Output Read Write Address Length Word Description Unit Data Format Note Digital Output Channel Enable Remote Alarm Pulse Digital Output Channel Output Operation Mode Only when the alarm type is selected Digital Output Channel Link Alarm Only when the alarm type is selected
