MVME162-431机器人模块卡件
表模块属性设置参数项目选择常规选项卡名称必填必须符合描述可选通信格式取决于所选的组件实例地址主机名地址目标单元的地址主机名不适用连接参数组件实例大小通信格式数据表描述输入选择一个输入数据产品信息输入数据实时电压和电流输入数据真实实时功率，频率输入数据实际最大电压和电流输入数据真正最大功率，频输入数据实际电压和电流输入数据真实功率，频率输入数据真实电能表输入数据报警和输出状态输出仪器用于仅输入连接仪器用于仅侦听连接配置实例是仅占位的连接选项卡或更大抑制模块可选默认未选中主要故障可选默认单播连接未选中可选默认选中仅当与另一个控制器存在仅输入连接时才使用仅侦听连接。年月通信第章完成后，单击确定保存新模块。模块按照请求的数据包间隔更新其输入标签您可以使用其他编程以另一种方式显示数据。实例以或浮点格式显示数据。然而，实例将字符与数字字节值组合在一起。此程序以更具可读性的方式显示实例的内容标记上的指令启用转换。第一指令复制模块输入数据标签的前个字节。指令将序列号字符串长度设置为。最后一个指令从模块输入数据标签复制序列号，该标签从元素字节开始。年月第章通信指令的目的地位于具有用户定义数据类型的标签中。目标标记以这种方式显示数据。通信有关协议的完整描述，请参阅以下文件，可从:下载。功能支持在装置中，订购时带有可选的通信。此外，在订购的装置中支持可选以太网通信。必须配置电源监视器中的通信参数。请参阅本手册的单元配置部分。重要提示我们建议您使用配置或写入单元，并使用读取。年月通信第章单元支持以下功能读取保持寄存器读取输入寄存器写入一个保持寄存器写入多个寄存器诊断子功能代码读取特殊寄存器供应商特定广播模式地址上的写入命令在此扇区中，地址以两种方式表示。地址表示为位输入寄存器地址例如，与功能代码一起使用。物理地址是包含在通信帧中的字地址的十六进制表示。功能可与地址一起使用，方法是用代替第一个数字例如。因此，区分函数和返回相同的数据。为了避免由于信号反射或线路耦合引起的错误，必须在主站和离主站最远的功率监视器的端口处连接终端电阻器。在中，您可以在和之间安装跳线，以在内部和之间施加所需的终端电阻。
Table Module Attribute Setting Parameter Item Selection General Tab Name Mandatory must conform to description Optional communication format depends on the selected component instance address Host name Address Target unit address Host name Not applicable to connection parameters Component instance size Communication format Data table Description Input Select an input data Product information Input data Real time voltage and current Input data Real time power, The actual maximum voltage and current input data of the frequency input data are the real maximum power, the actual voltage and current input data of the frequency input data are the real power, Frequency input data Real electric energy meter Input data alarm and output status Output instrument is used for input connection only Instrument is used for listening connection Connection tab or larger suppression module whose configuration instance is only occupied Optional default is not selected Main fault Optional default unicast connection is not selected Optional default is selected Only listen connection is used when there is an input only connection with another controller. Click OK to save the new module after the completion of the month month communication chapter. The module updates its input tags at the requested packet interval You can use other programming to display the data in another way. Instance displays data in or floating point format. However, instances combine characters with numeric byte values. This program displays the instructions on the content tag of the instance in a more readable way to enable conversion. The first instruction copy module inputs the first byte of the data tag. The directive sets the serial number string length to. The last instruction copies the serial number from the module input data tag, which starts with the element byte. The purpose of the communication instructions in the chapter of January, is in the tags with user-defined data types. The target tag displays the data in this way. For a complete description of the communication related protocols, please refer to the following files, which can be downloaded from:. The function is supported in the device with optional communication when ordering. In addition, optional Ethernet communication is supported in the ordered devices. The communication parameters in the power monitor must be configured. Refer to the unit configuration section of this manual. Important We recommend that you use the configuration or write unit, and use read. The unit in the chapter of the month month communication supports the following functions: read the holding register, read the input register, write one holding register, write multiple registers, diagnose the subfunction code, read the special register, read the write command on the address of the supplier's specific broadcast mode in this sector, and the address is expressed in two ways. The address is represented as a bit input register address for example, used with function codes. The physical address is a hexadecimal representation of the word address contained in the communication frame. The function can be used with the address by replacing the first number with e.g. Therefore, distinguish between functions and return the same data. To avoid errors caused by signal reflection or line coupling, a terminating resistor must be connected at the port of the master station and the power monitor farthest from the master station. In, you can install jumpers between and to apply the desired terminating resistance between the inside and.
