MVME2301-900系统模块卡件
用于减少树脂燃烧倾向的树脂或表面涂层的阻燃添加剂。纤维体积分数纤维体积与含有纤维的复合材料体积的比率。热固性树脂的组分充分反应以使树脂产生特定性能的完全固化期。从无机熔接物中提取的玻璃纤维细丝，其通常包含已冷却而未结晶的二氧化硅基材料。玻璃纤维增强的聚合物复合材料，包括用玻璃纤维布、垫或股线增强的聚合物基质。玻璃化转变温度代表非晶材料（例如玻璃或高分子）从（或到）脆性玻璃化状态转变为（或从）塑性状态的温度范围的温度。用树脂或粘合剂浸渍以使纤维饱和。用于启动不饱和聚酯和乙烯基酯树脂固化过程的引发剂化学品。层间剪切力倾向于沿着两个薄片之间的界面平面产生相对位移。膨胀型涂层覆盖物，当暴露于火灾时膨胀，增加体积并降低密度，从而提供一定程度的被动防火保护。单层纤维增强层。层压多层或层压在一起。
将增强材料和树脂系统放置到位进行模塑的叠层工艺。低分子量的单体有机分子，通过与自身或其他低分子量化合物反应生成固体聚合物。酚醛树脂由芳香醇与醛（通常是苯酚与甲醛）缩合反应生成的热固性树脂。沥青粘性物质，作为石油或煤焦油的残留物，用作制造某些碳纤维的前体。聚丙烯腈合成的半结晶有机聚合物基材料，被纺成纤维形式，用作某些碳纤维制造商的前体。聚酯一大类合成树脂，主要由二元酸与二羟基醇反应生成。对含有热固性树脂的材料进行高温后固化，以增加聚合物交联度并增强最终材料性能。用树脂或粘合剂预浸渍的织物或垫的预浸料片，已部分固化并准备好最终成型和固化。用于制造纤维增强聚合物复合材料的拉挤连续工艺，其中树脂浸渍的纤维增强材料（粗纱或垫子）被拉过成型和固化模具，以生产具有均匀横截面的复合材料。用于制备混凝土基底的腻子增稠聚合物基树脂。树脂含量纤维增强聚合物复合材料层压板中树脂的含量，以总质量或总体积的百分比表示。
Flame retardant additive for resin or surface coating used to reduce the burning tendency of resin. Fiber volume fraction The ratio of fiber volume to the volume of composite containing fibers. Complete curing period in which the components of thermosetting resin fully react to enable the resin to produce specific properties. Fiberglass filaments extracted from inorganic fusion splices, which usually contain cooled, non crystalline silica based materials. The glass fiber reinforced polymer composite includes a polymer matrix reinforced with glass fiber cloth, mat or strand. The glass transition temperature represents the temperature range of amorphous materials (such as glass or polymer) from (or to) brittle glass state to (or from) plastic state. Impregnate with resin or adhesive to saturate fibers. Initiator chemicals used to start the curing process of unsaturated polyester and vinyl ester resins. The interlaminar shear force tends to produce relative displacement along the interface plane between the two sheets. The expandable coating covering can expand when exposed to fire, increase the volume and reduce the density, thus providing a certain degree of passive fire protection. Single layer fiber reinforced layer. To lay in layers or layers together.
The lamination process of placing reinforcement and resin systems in place for molding. Low molecular weight monomer organic molecules react with themselves or other low molecular weight compounds to form solid polymers. Phenolic resin A thermosetting resin formed by the condensation reaction of aromatic alcohols and aldehydes (usually phenol and formaldehyde). An asphaltic viscous substance used as a residue of petroleum or coal tar and as a precursor for the manufacture of certain carbon fibers. A semi crystalline organic polymer based material synthesized from polyacrylonitrile, spun into fiber form, and used as a precursor for some carbon fiber manufacturers. Polyester is a kind of synthetic resin, which is mainly formed by the reaction of dibasic acid and dihydroxy alcohol. The materials containing thermosetting resins are cured at high temperature to increase the degree of polymer crosslinking and enhance the performance of the final materials. The prepreg sheet of fabric or pad pre impregnated with resin or adhesive has partially cured and is ready for final forming and curing. A pultrusion continuous process for manufacturing fiber reinforced polymer composites, in which resin impregnated fiber reinforced materials (roving or mats) are pulled through molding and curing molds to produce composites with uniform cross sections. Putty thickened polymer based resin for preparing concrete substrate. Resin content The content of resin in fiber reinforced polymer composite laminates, expressed as a percentage of total mass or total volume.
