MVME3600备件模块
编辑需要允许更改加载包的特殊许可证。其中一个属性是密码，可以启用密码，并且必须在包创建时输入密码。除非加载包为空，否则当前无法更改或禁用密码。另请参阅：什么是备份包2.连接到DDCS网络如果您在开始备份、还原或下载操作之前已将DriveWindow连接到了DDCS网络（OPC服务器），那么它也是这些操作中使用的网络（OPC Server）。但是，如果在开始备份、还原或下载操作之前没有连接到DDCS网络，则会自动连接到本地DDCS网络（本地PC中的OPC服务器ABB.SP（DriveOPC））。建议在备份、还原或下载期间，网络中没有额外的流量。这可以通过停止所有监视并使DriveWindow脱机来完成。如果您使用本地DDCS网络，也可以通过断开DriveWindow与网络的连接来完成。如果DriveWindow连接到DDCS网络，则在还原或下载操作后会进行内部断开/重新连接，因为这些操作可能会完全更改某些驱动器的标识。注意，DriveWindow无法处理本地DriveDA OPC服务器驱动器（AC880系列）的系统软件。但是，可以处理通过DriveDA连接到DriveOPC的ACS800系列驱动器的系统软件。3.如何备份备份意味着将一个或多个驱动器FPROM的内容保存到一个称为备份包的备份文件中。也可以在现有备份包中添加或替换备份的FPROM。注意，DriveWindow无法处理本地DriveDA OPC服务器驱动器（AC880系列）的系统软件。请注意，出于安全原因，在控制某些驱动器时，不能备份任何驱动器。菜单中的命令被禁用（灰色）。系统软件8-4 DriveWindow 2在进行备份之前，必须打开备份包。要备份您：•创建新备份包或打开现有备份包•备份所有驱动器或选择要备份的驱动器•在执行备份时等待•保存备份包•关闭备份包注意！节点地址1为备件预留。如果您的驱动器网络在节点地址1有一个驱动器，则无法将备份还原到其他节点地址的驱动器，除非在尝试还原之前断开节点1的连接。
Editing requires the special license that allows changing a loading package. One of the properties is a password, which can be enabled and must be entered at package creation time. It is currently not possible to change or disable the password unless the Loading Package is empty. See Also: What is a Backup Package 2. Connecting to DDCS Network If you have connected DriveWindow to the DDCS Network (OPC Server) before starting a Backup, Restore, or Download operation, it is also the network (OPC Server) used in those operations. If, however, you do not have a connection to a DDCS Network before starting a Backup, Restore, or Download operation, connection is automatically made to the local DDCS Network (OPC Server ABB.SMP (DriveOPC) in the local PC). It is recommended that during Backup, Restore, or Download there is no extra traffic in the network. It can be done by stopping all monitoring and putting DriveWindow offline. If you are using the local DDCS Network, it can be also done by disconnecting DriveWindow from the network. If DriveWindow is connected to the DDCS Network, there is an internal disconnect/reconnect done after Restore or Download operation because those operations may totally change the identity of some Drive. Note that DriveWindow is not able to handle system software of native DriveDA OPC server drives (AC880 family). However, system software of ACS800 family of drives connected to DriveOPC through DriveDA can be handled. 3. How to Backup Backing up means saving the contents of one or more Drive FPROMs into a single backup file called Backup Package. It is also possible to add or replace backed up FPROMs within an existing Backup Package. Note that DriveWindow is not able to handle system software of native DriveDA OPC server drives (AC880 family). Note that for safety reasons you cannot backup any drive while control of some drive is taken. The commands in the menu are disabled (grayed). System Software 8-4 DriveWindow 2 Before it is possible to do backup, you must have a Backup Package open. To backup you: • Create a new or open an existing Backup Package • Backup all Drives or select the Drives to be backed up • Wait while backup is executing • Save the Backup Package • Close the Backup Package Note! Node address 1 is reserved for spare parts. If your drive network has a drive at node address 1, restoring a backup to drives at other node addresses is not possible, unless you disconnect node 1 before you try to restore.
