PFEA 111-65工控模块系统备件
预计装运重量型号干硅填充第15页标准范围：如何订购，请参见第6页美国纽约州罗切斯特市圣保罗街408号Tel Tru制造公司，邮编：14605电话：585.232.1440 800.232.5335传真：585.232.3857电子邮件：info@teltru.com网址：www.teltru.com选项：其他螺纹或普通连接。硅胶填充。其他镜片为丙烯酸、聚碳酸酯或钢化玻璃。其他阀杆直径GT-200/GT-225.140“（3.6mm）型号。LN-250.236”（6mm）和.375“（9.5mm）。可根据要求提供其他配置组合。GT-200.350”（8.89mm）1.750“（44.45mm）.150”（3.81mm）GT-225.438“（11.13mm）2.089”（53.06mm）-150”（3.81 mm）LN-250.438“（11.13 mm）2.089“（53.06毫米）.250”（6.35mm）型号“A”“B”“C”LN-250R GT-200，GT-225，和LN-250第16页13/4“、2”和3”实验室测试和通用温度计型号代码：GT-100和MT-39 13/4“直径头GT-100R和MT-39R 13/4”直径头，带有校准功能LT-225 2“直径头LT-225R和BT-275R 2”直径头和校准功能LT-325R 3“直径头，带校准功能规格：阀杆长度：5”、8”、12”和18”。阀杆直径：150“标准至18”阀杆。连接：GT-100、MT-39和LT-225普通衬套是标准的。GT-100R、MT-39R、LT-225R、BT-275R和LT-325R重新校准螺母是标准的。外部复位：GT-100R、MT-39R、LT-225R、BT-275R和LT-325R摩擦螺母设计，便于校准。结构：304不锈钢外部部件。焊接结构。耐大多数化学品腐蚀。密封：符合ASME B40.3防尘和防漏要求。表盘：阳极氧化铝，带有大的黑色数字和刻度。镜头：GT、MT和LT型号为标准玻璃。双金属线圈：螺旋线圈在低于500°F的温度范围内涂有硅酮涂层，用于减振和最大化传热和响应时间。精度：根据ASME B40.3 A级，±1%满量程。超温限值：高达250°F 100%；250°F至550°F，50%；550°F至1000°F，连续使用至800°F，间歇使用超过800°F。可调盘夹：5“和8”GT-100R、LT-225R和LT-325R上的标准（用于油箱和托盘安装）。这些型号适用于实验室、食品、混凝土、沥青与华氏温度等通用测试应用。重要注意事项：1）浸没–为了使用Tel-Tru温度计获得最准确的读数，浸没在阀杆下部的凹槽中。2） MT和BT型号设计有Tel-Tru独特的泄压环功能，旨在防止在热烤箱中烹饪时温度计头中的压力积聚。3） 一些型号和范围获得NSF®认证（国家卫生基金会）。上表注释：（可提供其他范围–请咨询工厂）*温度范围为200/1000°F和100/550°C的温度计不建议在800°F/425°C以上连续使用（仅限间歇使用）。第17页标准范围13/4“、2”和3“型号：如何订购，请参见Estimated Shipping Weights MODEL DRY SILICONE FILLED Page 15 STANDARD RANGES: FOR HOW TO ORDER, SEE PAGE 6 Tel-Tru Manufacturing Company 408 St. Paul St., Rochester, New York 14605 USA Phone: 585.232.1440 800.232.5335 Fax: 585.232.3857 E-mail: info@teltru.com Web: www.teltru.com OPTIONS: Other threaded or plain connections. Silicone filled. Other lenses are acrylic, polycarbonate or tempered glass. Other stem diameters GT-200/GT-225 .140" (3.6mm) models. LN-250 .236" (6mm) and .375" (9.5mm). Other configuration combinations available upon request. GT-200 .350" (8.89mm) 1.750" (44.45mm) .150" (3.81mm) GT-225 .438" (11.13mm) 2.089" (53.06mm) .150" (3.81mm) LN-250 .438" (11.13mm) 2.089" (53.06mm) .250" (6.35mm) MODEL "A" "B" "C" LN-250R GT-200, GT-225, AND LN-250 Page 16 13 /4", 2" and 3" Laboratory Testing and General Purpose Thermometers MODEL CODES: GT-100 and MT-39 13 /4" diameter head GT-100R and MT-39R 13 /4" diameter head with calibration feature LT-225 2" diameter head LT-225R and BT-275R 2" diameter head with calibration feature LT-325R 3" diameter head with calibration feature SPECIFICATIONS: Stem Lengths: 5", 8", 12" and 18". Stem Diameter: .150" standard up to 18" stem. Connection: GT-100, MT-39 and LT-225 plain bushing is standard. GT-100R, MT-39R, LT-225R, BT-275R and LT-325R recalibrating nut is standard. External Reset: GT-100R, MT-39R, LT-225R, BT-275R and LT-325R friction nut design for easy calibration. Construction: 304 stainless steel external parts. Welded construction. Corrosion resistant to most chemicals. Hermetic seal: Per ASME B40.3 dustproof and leakproof. Dial: Anodized aluminum with large black numbers and graduations. Lens: GT, MT, and LT models glass is standard. Bimetal Coil: Helix coil is silicone coated on ranges below 500°F for vibration dampening and to maximize heat transfer and response time. Accuracy: ±1% full span per ASME B40.3 Grade A. Over Temperature Limits: Up to 250°F 100%; 250°F to 550°F, 50%; 550°F to 1000°F, continuous use up to 800°F, intermittent use over 800°F. Adjustable Pan Clip: Standard on 5" and 8" GT-100R, LT-225R and LT-325R (for tank and tray mounting). These models are used for general-purpose testing applications such as laboratory, food, concrete, asphal v. Fahrenheit Celsius IMPORTANT NOTES: 1) IMMERSION– For most accurate reading with Tel-Tru thermometers immerse past groove on lower portion of stem. 2) MT and BT models are designed with Tel-Tru unique pressure relief ring feature designed to prevent pressure build up in thermometer head while cooking in hot oven. 3) Some models and ranges are NSF® certified (National Sanitation Foundation). Notes for above table: (Additional Ranges Available– Consult factory) * Thermometers with temperature ranges 200/1000°F and 100/550°C are NOT RECOMMENDED FOR CONTINUOUS USE ABOVE 800°F/425°C (FOR INTERMITTENT USE ONLY). Page 17 STANDARD RANGES 13 /4", 2" AND 3" MODELS: FOR HOW TO ORDER, SEE
