PFSA103ESTU 3BSE016268R1脉冲输入卡件
电缆类别。电机电缆类型Kinetix驱动器m（ft）Kinetix驱动m（英尺）-CSxMDx xxAAxx单根标准（非柔性）电缆电缆长度，最大=（）+延长电缆+总电缆长度=，max=加上延长电缆+总电缆长度=重要信息由于单电缆技术的独特特性，专为Kinetix驱动器、Kinetix双轴逆变器和Bulletin VPS电机设计并进行测试，因此不可自行构建电缆或使用第三方电缆。SpeedTec DIN（M）单电缆插头SpeedTec DIN连接器-CSBMDF xxAAxx（标准，非柔性）电源/反馈/制动电缆-CSWMDF xxAAxx（标准，无柔性）电源电缆/反馈电缆-CSBMDFxxAFxx（连续柔性）电源线/反馈/制动器电缆-CSBMDE xxAAxx电源/反馈/制动电缆-CSBMDG xxAAxx（标准，非柔性）电源/反馈-制动电缆-CSMMDG xxAAxx至Kinetix驱动器-CSxMDG电缆适用于Kinetix或Kinetix驱动出版物KNX-TDA-EN-P-2月Kinetix旋转运动规格Kinetix VP不锈钢电机选项Kinetix VP-不锈钢电机有以下可配置选项：正空气压力附件套件（目录号MPS-air-PURGE）安装在电机后盖上，以提供正空气并进一步减少电机内部污染的机会。安装和拆卸不需要专用工具。轴封套件（带抛油环）可用于现场更换。轴封由PTFE制成，并包含润滑剂以减少磨损。轴封套件目录号请参阅Kinetix VP不锈钢伺服电机安装说明，出版物VPS-IN，了解更多信息。技术规格-Kinetix VP不锈钢电机Kinetix VP-不锈钢电机（V级）性能规格重要事项轴封可能会磨损，需要定期检查和更换。根据使用情况，建议每个月更换一次，但不得超过个月。电机类别。No.轴密封套件目录。不
Cable Cat. No. Motor Cable Type Kinetix Drives m (ft) Kinetix Drives m (ft) -CSxMDx-xxAAxx Single, standard (non-flex) cable Cable length, max = () Plus extension cable + Total cable length = () Cable length, max = () Plus extension cable + Total cable length = () -CSxMDx-xxAFxx Single, continuous-flex cable Cable length, max = Plus extension cable + Total cable length = IMPORTANT Due to the unique characteristics of single cable technology, designed for and tested with Kinetix drives, Kinetix dual-axis inverters, and Bulletin VPS motors, building your own cables or using third-party cable is not an option. SpeedTec DIN (M) Single Cable Plug SpeedTec DIN Connector -CSBMDF-xxAAxx (standard, non-flex) power/feedback/brake cables -CSWMDF-xxAAxx (standard, non-flex) power/feedback cables -CSBMDF-xxAFxx (continuous-flex) power/feedback/brake cables -CSBMDE-xxAAxx (standard, non-flex) power/feedback/brake cables -CSWMDE-xxAAxx (standard, non-flex) power/feedback cables -CSBMDE-xxAFxx (continuous-flex) power/feedback/brake cables -CSBMDG-xxAAxx (standard, non-flex) power/feedback/brake cables -CSWMDG-xxAAxx (standard, non-flex) power/feedback cables -CSBMDG-xxAFxx (continuous-flex) power/feedback/brake cables VPS-B and VPL-B motors Receives only single motor cable plugs Attach cable plug with one-quarter turn m (. ft) cable extension -CSxMDF cables apply to Kinetix drives -CSxMDE cables apply to Kinetix drives -CSxMDG cables apply to Kinetix or Kinetix drives Publication KNX-TDA-EN-P - February Kinetix Rotary Motion Specifications Kinetix VP Stainless Steel Motor Options Kinetix VP stainless-steel motors are available with these configurable options: The positive air pressure accessory kit (catalog number MPS-AIR-PURGE) is mounted to the rear cover of the motor to provide positive air pressure and further reduce the chance of contamination inside the motor. No special tool is required for installation and removal. Shaft seal kits (with slinger) are available for field replacement. Shaft seals are made of PTFE and include a lubricant to reduce wear. Shaft Seal Kit Catalog Numbers Refer to the Kinetix VP Stainless Steel Servo Motor Installation Instructions, publication VPS-IN, for more information. Technical Specifications - Kinetix VP Stainless Steel Motors Kinetix VP Stainless Steel Motor (V-class) Performance Specifications IMPORTANT Shaft seals are subject to wear and require periodic inspection and replacement. Replacement is recommended every months, not to exceed months, depending on use. Motor Cat. No. Shaft Seal Kit Cat. No
