PP887H 3BSE092986R1工控模块机器人备件
ITR5 4对接拼接连接器108433 4引脚卷曲1按钮灯泡标准尺寸型号。传感器垫500mm x 500mm米高梅1010传感器垫750mm x 500mm米高梅1510传感器垫1000mm x 500mm米高梅2010传感器垫500mm×1500mm米高梅1030传感器垫750毫米x 750mm米高梅1515传感器垫1000mm×750mm米高梅2015传感器垫750毫米x 1500mm米高梅1530传感器垫1000毫米x 1000mm米高梅2020传感器垫1000 mm x 1250mm米高米2025传感器垫1000 x 1500mm米米高梅2030 40长度目录号。标准周边饰件2M 440F-T3210标准周边饰件3M 440F-T3310标准周边内饰5M 440F-T3510外角标准周边饰件-440F-T3012内角标准周边内饰-440F-T301带电缆通道的周边饰件2M440F-T3211带电缆通道4M 440F-T3411带电缆槽的外角周边饰件-440 F-T3014内角带电缆槽的周边装饰件-440F-T3015主动单元装饰件-440 F-T3020乙烯基导线导管-440F-T3230垫控制器-440F-C4000P-440F-C4 000S-440F-C8000D-440F-C28013）安装到套件中，安装套件外壳，并进行所需的电气连接。这些说明还介绍了附件交流电源适配器。有关详细信息，请参阅第4页的交流电源适配器（20-XCOMM-AC-PS1）。兼容性此套件仅适用于以下Allen-Bradley通信适配器（单独销售）：DSI外部通信套件通常用于为无法容纳内部安装适配器的PowerFlex 4和PowerFlex 4M驱动器提供网络连接。最多5个驱动器可以通过其RS-485端口连接到22-XCOMM-DC-BASE通信套件。安装通信适配器
ITR5 4 Butt splice connectors 108433 4 Pin crimps 1 Push button bulb Standard sIzes Model No. Sensor mat 500mm x 500mm MGM 1010 Sensor mat 750mm x 500mm MGM 1510 Sensor mat 1000mm x 500mm MGM 2010 Sensor mat 500mm x 1500mm MGM 1030 Sensor mat 750mm x 750mm MGM 1515 Sensor mat 1000mm x 750mm MGM 2015 Sensor mat 750mm x 1500mm MGM 1530 Sensor mat 1000mm x 1000mm MGM 2020 Sensor mat 1000mm x 1250mm MGM 2025 Sensor mat 1000mm x 1500mm MGM 2030 40 length Catalog No. Standard Perimeter Trim 2M 440F-T3210 Standard Perimeter Trim 3M 440F-T3310 Standard Perimeter Trim 5M 440F-T3510 External Corner Standard Perimeter Trim - 440F-T3012 Internal Corner Standard Perimeter Trim - 440F-T3013 Perimeter Trim with Cable Channel 2M 440F-T3211 Perimeter Trim with Cable Channel 4M 440F-T3411 External Corner Perimeter Trim with Cable Channel - 440F-T3014 Internal Corner Perimeter Trim with Cable Channel - 440F-T3015 Active Uniting Trim - 440F-T3020 Vinyl Wire Guide - 440F-T3230 Mat Controllers - 440F-C4000P - 440F-C4000S - 440F-C4000D - 440F-C28013 ) into the kit, mount the kit enclosure, and make the required electrical connections. These instructions also describe the accessory AC Power Adapter. See AC Power Adapter (20-XCOMM-AC-PS1) on page 4 for details. Compatability This kit is for use with only the following Allen-Bradley communication adapters (sold separately): The DSI External Comms Kit is typically used to provide a network connection for PowerFlex 4 and PowerFlex 4M drives which cannot accomodate an internally-mounted adapter. Up to 5 drives can be connected via their RS-485 ports to the 22-XCOMM-DC-BASE Comms Kit. Installing the Communications Adapter
