PPC380AE102 HIEE300885R0102自动化模块
离开垫子，检查机器启用LED灯是否熄灭，重置按钮是否点亮。-按下并松开重置按钮，检查机器启用LED是否亮起，重置按钮是否熄灭。5.重复上述测试，检查远程重置按钮和指示灯（如果安装）。33 6.重复上述步骤，检查连接到垫子系统的任何状态监测的正确操作。B、 仅限自动重置模式（使用440F-C28013控制单元时不相关）2.检查控制单元上的：-绿色LED-电源亮起-绿色LED–机器已启用。3.站在垫子上，检查机器已启用LED是否熄灭。4.离开垫子，检查机器启用LED是否亮起。5。重复上述步骤，以检查连接到垫系统的任何状态监测的正确操作。440F-C28013控制单元功能仅自动重置模式1。检查控制单元：绿色LED-电源亮起绿色LED-机器启用亮起通道故障LED 1至8亮起绿色，与安装的垫子数量相匹配。2.站在1号垫子上，检查机器启用LED熄灭，信道故障LED变为红色。3.离开垫子，检查控制系统是否恢复到与上述第1项相同的状态。
4. Step off the mat, check the MACHINE ENABLED LED remains off and the reset button is illuminated. - Press and release the reset button, check the MACHINE ENABLED LED comes on and the reset button goes off. 5. Repeat the above tests to check the remote reset button(s) and lamp(s) if fitted. 33 6. Repeat the above to check the correct operation of any status monitoring connected to the mat system. B. AUTO RESET MODE ONLY (not relevant when using 440F-C28013 control unit) 2. Check on the Control unit that: - the green LED - POWER is illuminated - the green LED - MACHINE ENABLED is on. 3. Stand on the mat and check the MACHINE ENABLED LED goes off. 4. Step off the mat, check that the MACHINE ENABLED LED goes on. 5. Repeat the above to check the correct operation of any status monitoring connected to the mat system. 440F-C28013 CONTROL UNIT FUNCTIONS Auto reset mode only 1. Check on the control unit that: The green LED - POWER is illuminated The green LED - MACHINE ENABLED is illuminated The CHANNEL FAULT LED’s 1 to 8 are illuminated green matching the number of mats installed. 2. Stand on mat number 1 and check the MACHINE ENABLED LED goes off and the CHANNEL FAULT LED changes to RED. 3. Step off the mat and check that the control system returns to the same state as item 1 above.
