EMERSON A6120 工控模块机器人备件
机械连接类型•弹簧加载可拆卸接线板•2 x RJ45（仅连接到灯阵列）•仅CAN型号：用于CAN通信的两个额外RJ45连接器材料外壳ABS（FR）UL94-V0盖聚碳酸酯附件所需附件45MLA灯阵列（类别号45MLA-xxxxx0Pxx）。请参见第11页的附件。注意：这些设备仅用于物体识别，不得用于保护人身（进入保护）。警察的唯一目的是侦察目标，并利用人类保护（保护行动）最高环境温度：55°C（131°F）环境温度最高：55°F（131°C）注意：必须使用提供的索环安装电缆，以保持IP54标准。不得在安装环境中挤压电缆或对电缆施加机械应力。2罗克韦尔自动化出版物45MLA-IN002C-EN-P-2020年8月45MLA控制器安装说明安装说明本装置可安装在DIN导轨上，安装支架位于背面，或四个螺钉穿过从外壳角部延伸的凸耳上的孔。为了减少电磁干扰的影响，请确认没有连接电缆靠近高功率或高频电路电缆。电气配置控制器单元包含控制灯阵列电子器件的主
PCBMechanical Connection types • Spring loaded removable terminal strips • 2 x RJ45 (connection to light arrays only) • CAN model only: Two additional RJ45 connectors for CAN comms Material Housing ABS (FR) UL94-V0 Cover Polycarbonate Accessories Required accessories 45MLA light arrays (Cat. No. 45MLA-xxxxx0Pxx). See Accessories on page 11. ATTENTION: • These devices are intended for object recognition only and may not be used for protection of humans (access protection). Ces appareils sont uniquement destinés à la reconnaissance d'objets et ne peuvent pas être utilisés pour la protection des humains (protection d'accès). • Maximum ambient temperature: 55 °C (131 °F) Température ambiante maximale: 55 °C (131 °F) ATTENTION: The cables must be mounted using the provided grommets to maintain IP54 standards. Do not allow the cables to be pinched or mechanically stressed in the mounted environment. 2 Rockwell Automation Publication 45MLA-IN002C-EN-P - August 2020 45MLA Controller Installation Instructions Mounting Instructions This unit can be mounted on a DIN rail either with the mounting brackets on the back or four screws through the holes on the tabs that extend from the corners of the housing. To reduce the influences of electromagnetic disturbances, verify that none of the connecting cables are lying next to high power or high frequency circuit cables. Electrical Configuration The controller unit contains a main PCB that controls light array electronics
