8237-1600工控模块机器人备件
翻译版本并不总是适用于每个版本。说明45MLA光阵列控制器驱动光阵列中的光电元件，这基本上是一系列透射光束对。该控制器有五个版本，每个版本都提供不同的通信平台，可以选择与一系列可编程逻辑控制器（PLC）一起工作。控制器包括许多应用程序功能，允许对许多应用程序进行定制。例如，I/O模块可用于配置多达四个具有独立输出和悬垂/超高检测的独立感测区。基本模型具有用于离散应用的开/关输出。模拟输出模式提供与目标高度、宽度或位置成比例的4…20 mA电流或0…10V输出。网络通信模型（RS-485和CAN）可用于通信精确的高度读数和单个光束状态。功能•用于45MLA测量灯阵列的外部控制器•高度测量能力•快速反应时间和测量速度•可配置超高和悬垂输出•模拟模型提供与目标高度、宽度成比例的4…20 mA或0…10V输出，或位置•基本型号提供用于开/关应用的单个离散输出•I/O型号功能用于配置具有单独输出的四个高度区域的示教按钮•RS-485和CAN通信型号提供额外功能，包括：-连接到RS-485或CAN网络（按型号）-详细的高度信息-单个光束状态规格主题页将法语翻译添加到注意表1将法语翻译到重要表2型号类别。
The translated version does not always apply to each version. It shows that the 45MLA optical array controller drives the photoelectric elements in the optical array, which is basically a series of transmitted beam pairs. The controller has five versions, each of which provides a different communication platform and can optionally work with a series of programmable logic controllers (PLCs). The controller includes many application functions, allowing customization of many applications. For example, I/O modules can be used to configure up to four independent sensing areas with independent outputs and overhang/superelevation detection. The basic model has on/off outputs for discrete applications. The analog output mode provides a 4... 20 mA current or a 0... 10V output proportional to the target height, width, or position. Network communication models (RS-485 and CAN) can be used to communicate precise height readings and single beam states. Functions • External controller for 45MLA measurement lamp array • Height measurement capability • Fast response time and measurement speed • Configurable superelevation and overhang output • Simulation model provides 4... 20 mA or 0... 10V output proportional to target height and width, Or position • The basic model provides a single discrete output for on/off applications • The I/O model function is used to configure teaching buttons for four height zones with separate outputs • The RS-485 and CAN communication models provide additional functions, including: - Connecting to the RS-485 or CAN network (by model) - Detailed height information - Single beam status specification topic page Add French translation to Note Table 1 Translate French to Important Table 2 Model category.
