TRICONEX 9672-810工控模块
电感通过施加
到锁定转子的零阻抗电压的阶跃输入测量的绕组电感。转子极惯性矩绕旋转轴的惯性矩。电机重量整个电机包括制动器，如果提供的重量减去选件的重量。平衡转子重量分布的补偿，以减少振动共振。电机在运行速度下进行工厂平衡。，系列，交流伺服电机出版物年月和旋转变压器和高分辨率电机的电机速度扭矩曲线重要：所示曲线和性能数据适用于放大器额定值大于或等于电机持续失速电流的电机和组合。
在环境中
在的线路电压下测试电机。外壳温度约为，电机绕组比环境温度升高。当电机安装在×钢安装支架上时，确定扭矩额定值。电机包含两个串联的热开关，在超温条件下打开。温度设置为±。触点的额定值为时为，时为。下面显示的所有值的公差为±。转速扭矩电机峰值峰值转速。峰值额定运行间歇运行类别参数环境温度下的额定速度。机组时的通用连续失速扭矩额定输出峰值失速扭矩时的峰值失速电流时的安培时的机械时间常数时的电气时间常数时的额定速度转速最高环境温度无降额绝缘等级级热时间常数分钟时的绕组扭矩常数伏时的电压常数时的终端电阻欧姆重量平衡
Inductance is applied by
The winding inductance measured by the step input to the zero impedance voltage of the locked rotor. The polar moment of inertia of the rotor about the axis of rotation. Motor weight The entire motor includes the brake, if the weight provided minus the weight of the options. Balance the compensation of rotor weight distribution to reduce vibration resonance. The motor is factory balanced at operating speed., Series, AC servo motor publications, and motor speed torque curves of resolvers and high-resolution motors Important: The curves and performance data shown are applicable to motors and combinations with amplifier ratings greater than or equal to the continuous stall current of the motor.
In the environment
Test the motor at line voltage of. The enclosure temperature is about, and the motor winding temperature is higher than the ambient temperature. When the motor is installed on the × Determine the torque rating when mounting on a steel bracket. The motor contains two thermal switches in series, which open under overtemperature conditions. The temperature is set to ±. The contact is rated when is and when is. All values shown below have a tolerance of ±. Speed Torque motor peak peak speed. Peak rated operation Intermittent operation category parameter Rated speed at ambient temperature. Universal continuous stall torque at unit time Rated output Peak stall torque Peak stall current Ampere hour Mechanical time constant Electrical time constant Rated speed Rotating speed Maximum ambient temperature No derating Insulation class Thermal time constant Winding torque constant Voltage constant Terminal resistance Ohm Weight balance
