TRICONEX 9765-210工控DCS系统备件
触点符合
附录关于镜面触点性能的要求。后视镜触点串联或并联，必须用作监控触点，并反馈至安全电路。公元前公元前公元前公元前公元前自动化出版物年月，接触器极直流操作接触器额定工作电流开关交流电机的额定值，辅助触点常规线圈类别。编号电子线圈类别编号如果需要标准的交叉压印辅助触点，请在类别中的字母之前删除字母。。示例：类别。编号变为。编号中。根据的首选值。触点符合附录对镜面触点性能的要求。
后视镜触点串联或并联
必须用作监控触点，并反馈至安全电路。仅适用于常规直流线圈。拾取绕组必须与迟断辅助触点互连。年更高的额定功率仅适用于带电子线圈的接触器。型公元前型公元前公元前自动化出版物年月，接触器线圈电压代码安全接触器。所列编号不完整。从下表中选择线圈电压代码以完成。。类别。编号变为。编号。交流电压，常规线圈交流电压，常规线圈交流电压，电子线圈接口信号电压。
Contact according to
Appendix Requirements for Mirror Contact Performance. The mirror contacts in series or parallel must be used as monitoring contacts and fed back to the safety circuit. BC BC BC BC BC BC BC BC Automation Publications Year, rated working current of contactor pole DC operated contactor, rated value of switch AC motor, category of auxiliary contact conventional coil. Number Electronic coil category number If you need standard cross imprint auxiliary contact, please delete the letter before the letter in the category.. Example: Category. The number changes to. No. Based on the preferred value of. The contact shall meet the requirements of the appendix for mirror contact performance.
Rearview mirror contacts in series or parallel
It must be used as a monitoring contact and fed back to the safety circuit. Only applicable to conventional DC coils. The pickup winding must be interconnected with the delayed break auxiliary contact. The higher rated power is only applicable to contactors with electronic coils. Type BC Type BC Automation Publications Year BC, Contactor Coil Voltage Code Safety Contactor. The numbers listed are incomplete. Select the coil voltage code from the table below to complete.. Category. The number changes to. Number. AC voltage, conventional coil AC voltage, conventional coil AC voltage, electronic coil interface signal voltage.
