UA C375 AE103/3BHB006621R0103模拟量输入模块
导线尺寸对于以上的电流
使用端子扩展。对于以上的电流，使用端子扩展。最大连接条宽度最大连接杆宽度自动化出版物年月接触器三相电机的切换；环境温度，额定工作电流，额定工作功率，】手册说明单总线多协议收发器，带可切换终端演示电路展示了带集成终端的®多协议收发器。作为一个独立的评估平台运行，或可与®或微控制器板一起用作屏蔽，用于快速和多功能评估。上的控制信号可通过外部监测或控制的测试点访问，也可通过跳线或设置。总线线路通过性能汇总板布局布线至测试点和接线板，方便连接至传输线。通过外部电源或直接从的稳压输出电源运行，通过跳线设置配置为或。此电路板的设计文件位于和徽标是的注册商标。所有其他商标均为其各自所有者的财产。
时的规格如所示
默认跳线设置由跳线处的矩形指示。默认用于输入电源操作操作最大数据速率演示手册快速启动程序概述多协议收发器包括一个驱动器和接收器以及一个驱动器和接收器。两针总线接口与和收发器共享，在给定的时间内只能激活一个。需要主电源至和逻辑电源至。设计为独立使用，或以屏蔽配置直接与微控制器板连接。它与同样兼容，尽管是首选，因为它添加了一个完全隔离的端口，为连接的计算机提供了额外的保护。提供了一个草，该草在加载和运行时显示控制和使用的选项菜单。可以根据需要自定义此草。提供了一种控制和观察上几乎每个引脚的方法。
Conductor size for above currents
Use terminal extension. For the above currents, use terminal expansion. Maximum width of connecting rod Maximum width of connecting rod Automation publication Monthly contactor three-phase motor switching; Ambient temperature, rated working current, rated working power,] manual description Single bus multi protocol transceiver, demonstration circuit with switchable terminal ® Multi protocol transceiver. Run as an independent evaluation platform or ® Or the microcontroller board is used together as a shield for quick and multi-function evaluation. The control signals on the can be accessed through external monitoring or controlled test points, or through jumpers or settings. The bus lines are routed to the test points and terminal blocks through the performance summary board layout for easy connection to the transmission lines. Operates from an external power source or directly from a regulated output power source, configured to or through jumper settings. The design file for this board is located at and the logo is a registered trademark of. All other trademarks are the property of their respective owners.
The specifications are shown in
The default jumper settings are indicated by the rectangle at the jumper. Default for Input Power Operation Operation Maximum Data Rate Demo Manual Quick Start Program Overview Multiprotocol Transceivers include a driver and receiver and a driver and receiver. Two pin bus interfaces are shared with and transceivers, and only one can be activated at a given time. The main power supply to and the logic power supply to are required. It is designed for independent use or directly connected to the microcontroller board in a shielded configuration. It is also compatible with, although preferred, because it adds a completely isolated port, providing additional protection for connected computers. A grass is provided, which displays the menu of options for control and use during loading and running. This grass can be customized as needed. A method of controlling and observing almost every pin is provided.
