UNS0121A-ZV1 3BHE035301R1002 备件库存
主题页
在开始打开和检查模块之前阅读提升注意事项模块重量提升模块额外资源自动化出版物月日 预充电模块打开和提升说明打开和检查模件交付后按照以下步骤打开和检查组件。检查运输集装箱在运输过程中有无损坏。拆下运输集装箱的盖子。移除保护性包装材料。检查模块有无损坏。如果模块存在损坏请联系发货的承运人和自动化销售代表安排检查。保留所有产品包装以供承运人审查。阅读提升注意事项在尝试提升直流预充电模块之前阅读这些注意事项。模块重量所有起重设备必须支持大约最大预充电模块重量 。
重要信息
自动化向承运人交付设备视为向买方交付。承运人对运输过程中发生的任何损坏负责。如果发现损坏买方有责任通知相关方。如果买方未能遵守这些步骤则买方将丧失任何赔偿损失或损害的权利。注意：用于提升模块的所有设备和硬件必须具有适当的尺寸和额定值以安全地提升和保持模块的重量。为防止可能的人身伤害或设备损坏：提升模块前检查所有硬件是否正确连接。不允许模块或提升设备的任何部分接触带电导体或部件。在提升或运输过程中请勿使模块高速加速或减速。在提升过程中不得让人员或其四肢直接位于模块下方。自动化出版物月日 预充电模块开箱和提升说明提升模块按照这些步骤提升模块。将适当的硬件插入并固定在指定的提升孔中如图所示。
Topic Page
Read the lifting precautions before starting to open and inspect the module module weight lifting module additional resources automation publication month day precharge module opening and lifting instructions opening and inspection module After delivery, follow the steps below to open and inspect the components. Inspect the shipping container for damage during transportation. Remove the cover of the shipping container. Remove protective packaging materials. Check the module for damage. If the module is damaged, please contact the shipping carrier and the automated sales representative to arrange an inspection. Keep all product packaging for carrier review. Read lifting precautions Read these precautions before attempting to lift the DC pre charge module. Module weight All lifting equipment must support approximately the maximum pre charged module weight.
important information
Automatic delivery of the equipment to the carrier shall be deemed as delivery to the buyer. The carrier shall be responsible for any damage occurring in the course of transportation. If damage is found, the Buyer shall be responsible for notifying the relevant parties. If the Buyer fails to follow these steps, the Buyer will lose any right to compensate for the loss or damage. Note: All equipment and hardware used to lift the module must be of appropriate size and rating to safely lift and maintain the weight of the module. To prevent possible personal injury or equipment damage: check that all hardware is properly connected before lifting the module. Do not allow any part of the module or lifting equipment to contact live conductors or parts. Do not accelerate or decelerate the module at high speed during lifting or transportation. Personnel or their limbs shall not be directly under the module during lifting. Automation publication Month Day Pre charge module Unpacking and lifting instructions Lifting module Follow these steps to lift the module. Insert and secure the appropriate hardware in the designated lifting holes as shown.
