UNS0867A-P V2/HIEE405246R0002工控模块机器人备件
建议使用
够支撑最大模块重量的带可锁定扣的起重机皮带和形钩。请参阅第页的模块重量。在安装直流预充电模块之前在机柜中安装其他所需的开放式套件。有关详细信息请参阅® 开放式套件安装说明出版物。如果用于安装则组装模块维修车和直流预充电模块提升延长选件。带有直流预充电提升延伸件的服务车用于提升直流预充电模块并将其安装到外壳中。有关如何组装和使用推车的信息请参阅 系列服务推车说明出版物。开始打开包装和检查模块前的主题页阅读提升注意事项模块重量提升模块额外资源自动化出版物月日 预充电模块打开包装和提升仪器打开并检查模块交付后按照以下步骤打开并检查该模块。检查运输集装箱在运输过程中有无损坏。
包装材料
拆下运输集装箱的盖子。移除保护性包装材料。检查模块有无损坏。如果模块存在损坏请联系发货的承运人和自动化销售代表安排检查。保留所有产品包装以供承运人审查。阅读提升注意事项在尝试提升直流预充电模块之前阅读这些注意事项。模块重量所有起重设备必须支持大约最大预充电模块重量 。重要信息自动化向承运人交付设备视为向买方交付。承运人对运输过程中发生的任何损坏负责。如果发现损坏买方有责任通知相关方。如果买方未能遵守这些步骤则买方将丧失任何赔偿损失或损害的权利。
Recommended
Crane belts and hooks with lockable buckles sufficient to support the maximum module weight. See Module Weights on page. Install other required open kits in the cabinet before installing the DC precharge module. For more information, see ® Open Kit Installation Instructions Publication. If used for installation, assemble the module maintenance vehicle and DC pre charging module lifting extension option. The service car with DC pre charge lifting extension is used to lift the DC pre charge module and install it into the housing. For information on how to assemble and use the trolley, refer to the series of service trolley instruction publications. Before opening the package and checking the module, read the topic page Lifting Precautions Module Weight Lifting Module Additional Resources Automation Publications Month Day Precharge Module Unpacking and Lifting Instrument Opening and Checking the Module After delivery, follow the steps below to open and check the module. Inspect the shipping container for damage during transportation.
packaging
Remove the cover of the shipping container. Remove protective packaging materials. Check the module for damage. If the module is damaged, please contact the shipping carrier and the automated sales representative to arrange an inspection. Keep all product packaging for carrier review. Read lifting precautions Read these precautions before attempting to lift the DC pre charge module. Module weight All lifting equipment must support approximately the maximum pre charged module weight. The delivery of important information automation equipment to the carrier shall be deemed as delivery to the buyer. The carrier shall be responsible for any damage occurring in the course of transportation. If damage is found, the Buyer shall be responsible for notifying the relevant parties. If the Buyer fails to follow these steps, the Buyer will lose any right to compensate for the loss or damage.
