VMIVME-7455-30工控机器人备件
远程隔板连接
伺服电机（460V）通过导电（金属）壁可选安装最大宽度4.623 mm（0.182 in）1326-CCUx-D（反馈）和1326-CPB1-D/-CPC1-D（电源）1326--CUx-E（反馈）或1326-CPB1-E/-CPC1-E（电源）AB 1394 ALLEN-BRADLY AB ALLEN-BRADLEY AB1326Ax电机（460V）支架安装（未提供）最大宽度4.623 mm（0.182 in）1326-CCUx-D（反馈）和1326-CPB1-D/-CPC1-D（电源）1326--CUx-E（反馈）或1326-CPB1-E/-CPC1-E（电源）7出版物1326A-2.11-1998年5月恶劣环境连接在恶劣环境中使用IP67电缆（带-L选项）和L电机。图4恶劣环境连接连接双端隔板在线连接此解决方案将柔性电缆和非柔性电缆结合在一起，以实现单次运行。
单电缆线路中
两个断开连接，带有双端隔板、双端标准电缆和标准电缆。图5标准双端舱壁，和双端电缆，用于与 IP67伺服电机 （解析器反馈） （未提供，最大宽度4.623 mm（0.182 in）8出版物1326A-2.11-1998年5月线性弯曲定义为单向弯曲。额定弯曲电缆不适用于双向弯曲的扭转弯曲。不得在扭转应用中使用电力轨道（线性挠性）电缆。用于换向的标准Allen-Bradley电缆-1326-CU-xxx和用于电源的1326-CPB1-xxx或1326-CPC1-xxx为托盘额定（固定）电缆，只能用于一次性挠性应用。•在发生动态线性弯曲的应用中，需要电力轨道布线。在这些应用中使用以下电缆：•1326 CCUT xxx（所有电机的换向）•1326-CPB1T-xxx（1326AS-B3xxx和1326AS-B4xxx电机的电源）•1326-CPC1T-xxx（用于1326AS-B6xxx和1326A S-B8xxx电机的功率）Allen-Bradley高柔电缆具有优异的最小弯曲半径规格，在线性弯曲应用中具有较长的弯曲循环寿命。线性柔性电缆的循环寿命与电缆在电力轨道中的弯曲半径直接相关。有关弯曲半径与循环寿命规格，请参阅下页的图表。
Remote bulkhead connection
Servo motor (460V) can be optionally installed through conductive (metal) wall with a maximum width of 4.623 mm (0.182 in) 1326-CCUx-D (feedback) and 1326-CPB1-D/- CPC1-D (power supply) 1326-CUx-E (feedback) or 1326-CPB1-E/- CPC1-E (power supply) AB 1394 ALLEN-BRADLY AB ALLEN-BRADLEY AB1326Ax Motor (460V) bracket installation (not provided) with a maximum width of 4.623 mm (0.182 in) 1326-CCUx-D (feedback) and 1326-CPB1-D/- CPC1-D (power supply) 1326-CUx-E (feedback) or 1326-CPB1-E/- CPC1-E (power supply) 7 publication 1326A-2.11-May 1998 Severe environment connection IP67 cable (with - L option) and L motor were used in severe environment. Figure 4 Severe environment connection Double end bulkhead online connection This solution combines flexible and non flexible cables to achieve single operation.
In single cable route
Two disconnected connections with double ended bulkhead, double ended standard cable and standard cable. Figure 5 Standard double ended bulkhead, and double ended cable, used with IP67 servo motor (resolver feedback) (not provided, maximum width 4.623 mm (0.182 in) 8 Publication 1326A-2.11-May 1998 Linear bending is defined as one-way bending. The rated bending cable is not suitable for torsional bending of two-way bending. Power track (linear flexible) cables shall not be used in torsional applications. The standard Allen Bradley cable-1326-CU-xxx for commutation and 1326-CPB1-xxx or 1326-CPC1-xxx for power supply are tray rated (fixed) cables and can only be used for one-time flexible applications. • In the application of dynamic linear bending, power track wiring is required. The following cables are used in these applications: • 1326 CCUT xxx (commutation of all motors) • 1326-CPB1T-xxx (power supply for 1326AS-B3xxx and 1326AS-B4xxx motors) • 1326-CPC1T-xxx (power for 1326AS-B6xxx and 1326A S-B8xxx motors) Allen Bradley high flexible cables have an excellent minimum bending radius specification and a long bending cycle life in linear bending applications. The cycle life of a linear flexible cable is directly related to the bending radius of the cable in the power track. Refer to the chart on the next page for bending radius and cycle life specifications.
