备件模块VMIVME-7700RC-111000
扩展电源
设置至（状态设置为） 扩展电源设为用法 打开以断开并释放以供自定义使用 模块的电源连接/断开也可以用作电流测量点评估套件硬件 开发板用户指南––年月日测试点一些测试点已放置在板上用于验证重要的信号焊料滴上设计了两个焊料滴用于隔离分配的线路断开可能性正如前面的一些接口描述中所指出的欧姆电阻器已插入的接收器线路路径上这些是连接到板上外部驱动器的线欧姆电阻器允许断开每个电阻器以供自定义使用（例如通过扩展连接器）
多功能性级别
这一特性为用户提供了一个额外的多功能性级别以便对自己的系统进行原型设计见下表表音频输入配置 测试点 测试点名称零件描述环钩 环钩环钩 环钩 衬垫 衬垫 衬垫背光驱动器阳极衬垫辅助输入用于触摸屏控制器衬垫辅助输出用于触摸屏控制器环钩 环钩 衬垫可选音频输入表焊滴指定默认设置功能打开从共享通道隔离输出关闭将连接到_通道评估套件硬件开发板用户指南 断开可能性指定默认指定
Extended power supply
Set to (Status set to) The extended power supply is set as the usage. Open it to disconnect and release it for custom use. The power connection/disconnection of the module can also be used as the current measurement point evaluation kit. Hardware development board user's guide – – Year Month Day Test points. Some test points have been placed on the board to verify important signal solder drops. Two solder drops are designed to isolate and distribute the circuit disconnection possibility. As indicated in the previous interface description, the ohmic resistor has been These are wire ohmic resistors connected to the external driver on the board on the inserted receiver line path, allowing each resistor to be disconnected for custom use (e.g. via an expansion connector)
Multi functionality level
This feature provides users with an additional level of versatility for prototype design of their own systems. See the following table for audio input configurations. Test point names. Part descriptions. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Pad. Backlight driver. Anode pad. Auxiliary input. Used for touch screen controller pad. Auxiliary output. Used for touch screen controller. Hook and loop. Hook and loop. Pad. Optional audio input. Table. Solder drop. Default setting function Turn on Isolate output from shared channel Turn off Connect to_ Channel Assessment Suite Hardware Development Board User Guide Disconnection Possibility Assignment Default Assignment
