WOODWARD 9907-186工控模块备件
将功能接地螺钉拧紧
至1.47 N•m（13 lb•in）的扭矩。5.向计算机提供18…32V直流电源。重要事项使用功能接地螺钉时，请使用1.5 mm2（16 AWG）或更大的外部导线将计算机连接到接地。使用当地检查机构允许的绝缘颜色的接地线-V+V显示计算机显示的环形连接器功能接地螺钉22用于危险场所的工业计算机自动化出版物6181X-IN001D-EN-P-2015年7月连接到网络计算机具有两个1 GB LAN端口。计算机通过使用带RJ45连接器的CAT5或CAT5E双绞线以太网电缆连接到以太网。附件和替换零件您可以在以下自动化网站查看附件和替换部件列表：在安装新组件之前，请检查其规格，以验证其是否与计算机兼容。记录新部件的型号和序列号以及任何其他相关信息，以供将来参考。
警告：
连接LAN电缆时，请确认电缆已完全插入LAN端口，且闩锁已接合。如果不这样做，可能会导致电弧，从而在危险位置引发爆炸。重要提示：为了防止以太网通信性能下降，请勿使计算机或电缆受到极端辐射或传导高频噪声。在工业环境中，以太网通信需要正确的电缆布线和电源调节。自动化公司建议您将所有以太网电缆通过专用金属导管布线。为了提高性能可靠性，在电缆端部安装铁氧体磁珠过滤器。重要提示：我们建议您仅使用Allen-Bradley批准的配件和替换零件。显示计算机非显示计算机危险场所工业计算机23自动化出版物6181X-IN001D-EN-P-2015年7月电压注意事项计算机包含线路电压。
Tighten the function grounding screw
Torque to 1.47 N • m (13 lb • in). 5. Provide 18... 32V DC power supply to the computer. IMPORTANT When using a functional grounding screw, use an external wire 1.5 mm2 (16 AWG) or larger to connect the computer to ground. Use the grounding wire of insulation color allowed by the local inspection authority - V+V shows the ring connector function displayed by the computer Grounding screw 22 Industrial computer automation publication 6181X-IN001D-EN-P-2015 July connected to the network computer has two 1 GB LAN ports. The computer is connected to the Ethernet network by using CAT5 or CAT5E twisted pair Ethernet cables with RJ45 connectors. Accessories and replacement parts You can view a list of accessories and replacement parts on the following automation website: Before installing a new component, check its specifications to verify that it is compatible with your computer. Record the model and serial number of the new part and any other relevant information for future reference.
Warning:
When connecting the LAN cable, make sure that the cable is fully plugged into the LAN port and that the latch is engaged. Failure to do so could result in an electric arc that could cause an explosion in a hazardous location. Important: To prevent the Ethernet communication performance from declining, do not expose the computer or cable to extreme radiation or conducted high-frequency noise. In an industrial environment, Ethernet communication requires proper cable routing and power conditioning. The automation company recommends that you route all Ethernet cables through special metal conduits. In order to improve the performance reliability, a ferrite bead filter is installed at the end of the cable. Important: We recommend that you use only Allen Bradley approved accessories and replacement parts. Display computer Non display computer Industrial computer in hazardous areas 23 Automation publication 6181X-IN001D-EN-P-2015 July Voltage precautions Computer includes line voltage.
