XDD501A101系统模块
重要信息：
计算机可以在各种极端情况下运行。如果你在最高额定温度下连续操作电脑，那么任何电子设备的寿命都会缩短。外壳外部最高55°C（131°F）外壳内部最高70°C（158°F）限制进入位置显示计算机非显示计算机外壳内部最高温度70°C自动化出版物6181X-IN001D-EN-P-2015年7月安装间隙要求最小间隙重要事项由于自热，请勿使用最小间隙在机箱中操作计算机，除非使用充分通风或其他方法降低机箱内的温度。留出足够的间隙来安装或拆卸外围组件，如内部驱动器要求的最小外壳尺寸（4右侧（用于气流和驱动器访问）127 mm（5 in.）5底部（用于I/O端口访问和通风）102 mm（4英寸）。)4 5 3 1 2用于危险场所的工业计算机13自动化出版物计算机尺寸审查计算机尺寸，以估计计算机安装所需的间隙。
非显示计算机14用于危险场所的工业计算机自动化出版物6181X-IN001D-EN-P-2015年7月集成显示计算机计算机安装工具计算机安装需要这些工具：•#2十字头螺丝刀•面板切割工具（用于面板安装）•钻孔电机、钻头、，和M4螺丝攻（用于墙壁安装）•防静电腕带安装计算机计算机支持以下安装选项：•面板安装（显示计算机型号）•墙壁安装（非显示计算机型号的）115（4.53）349（13.74）101.3（4）75.4（2.97）14.5（0.57）320（12.6）251（9.88）279（10.98）115（45.3）尺寸单位为毫米（英寸）。)用于危险场所的工业计算机15自动化出版物6181X-IN001D-EN-P-2015年7月面板安装指南在面板中安装计算机时，请遵守这些指南：•在制作切口之前，从面板上断开所有电源。
Important information:
Computers can operate under various extreme conditions. If you operate the computer continuously at the highest rated temperature, the life of any electronic device will be shortened. Maximum outside the enclosure 55 ° C (131 ° F) Maximum inside the enclosure 70 ° C (158 ° F) Restricted access position Display computer Non display computer Maximum inside the enclosure 70 ° C Automation publication 6181X-IN001D-EN-P-2015 July Installation clearance requirements Minimum clearance Important Due to self heating, do not use the minimum clearance to operate the computer in the chassis unless adequate ventilation or other methods are used to reduce the temperature inside the chassis. Leave enough clearance to install or remove peripheral components, such as the minimum enclosure size required for the internal drive (4 right side (for airflow and drive access) 127 mm (5 in.) 5 bottom (for I/O port access and ventilation) 102 mm (4 in.) 4 5 3 1 2 3Industrial computers for use in hazardous locations13 4 5automatic publications6 7 8 9computer sizes10 11 12 13review14 15 16 17computer sizes18 19 20 21to estimate the clearance required for computer installation.
Non display computer 14 Industrial computer automation publication 6181X-IN001D-EN-P-2015 July Integrated display computer Computer installation tools Computer installation requires these tools: • # 2 crosshead screwdriver • Panel cutting tool (for panel installation) • Drilling motor, drill bit, And M4 screwdrivers (for wall mounting) • Anti static wrist strap installation The computer supports the following installation options: • Panel mounting (display computer model) • Wall mounting (non display computer model) 115 (4.53) 349 (13.74) 101.3 (4) 75.4 (2.97) 14.5 (0.57) 320 (12.6) 251 (9.88) 279 (10.98) 115 (45.3) Dimensions are in millimeters (inches).) Industrial computers for hazardous locations15 Automation publication 6181X-IN001D-EN-P-2015 July Panel Installation GuideWhen installing a computer in a panel, follow these guidelines: • Disconnect all power from the panel before making the cut.
