XVME-230备件库存
置选项
可以通过线或线模拟设备公司的串行外围接口（）访问。还集成了两个状态机，便于配置、控制和快速切换倍频器、滤波器和发射机部分。这些定序器通过编程，然后通过脉冲输入操作（复位和提前）。输出功率和芯片温度可以由四个芯片上检测器和一个温度传感器监测，其输出被多路复用到位。只需要一个.电源，一个通道打开时功耗为。有一个紧凑的端子×封装，由−°至+°。功能框图缓冲器×××乘法器滤波器序列发送器序列控制温度。
传感器
乘法器滤波器状态机（状态）发射机状态机（输出频率范围输出功率输入功率（）=−乘法器启用，禁用−乘法器和禁用−信道隔离禁用信道到激活信道−就绪通道到活动通道−信道到信道切换频率使用就绪模式相位噪声输出偏移偏移偏移输出偏移偏移偏移-输出十偏移偏移偏移输出偏移偏移差分阻抗Ω差分回波损耗谐波滤波输入频率二次谐波抑制−三次谐波抑制−输出频率二次谐波抑制−三次谐波抑制−状态机和定时最小脉冲宽度，，最小脉冲间隔脉冲开始到脉冲开始
Settings
It can be accessed through the serial peripheral interface () of the line or line analog device company. Two state machines are also integrated to facilitate configuration, control and fast switching of frequency multiplier, filter and transmitter. These sequencers are programmed and then operated by pulse input (reset and advance). The output power and chip temperature can be monitored by four on-chip detectors and a temperature sensor, and the output is multiplexed to its place. Only one is needed Power consumption is when one channel is turned on. There is a compact terminal × Encapsulation, from − ° to+°. Functional block diagram buffer ××× Multiplier filter sequence transmitter sequence control temperature.
sensor
Multiplier filter state machine (state) transmitter state machine (output frequency range output power input power ()=− multiplier enable, Disable − multiplier and disable − channel isolation Disable channel to active channel − ready channel to active channel − channel to channel switching frequency Use ready mode Phase noise Output offset offset Output offset offset Output offset offset offset Differential impedance Ω Differential return loss Harmonic filtering Input frequency Second harmonic suppression − Third harmonic suppression − Output frequency Second harmonic suppression − Third harmonic suppression System − state machine and timing minimum pulse width, minimum pulse interval pulse start to pulse start
