触摸屏 PP846/3BSE042238R1
参数组线性列表
更改参数DIAG PARAM DSEL MEM SEL设备选择DSI设备DIAG PARAM DSEL MEM-SEL DSI设备PowerFlex 40 22-COMM-E选择诊断事件设备版本设备项目DIAG PARAM DSEL SEL设备版本22-COMM-E EtherNet/IP系列：A固件：1.007.04 22-COMM E EtherNet/IP适配器固件v1.008 3使用DriveExplorer Lite/Full 1。启动DriveExplorer并使用连接到适配器的驱动器联机（通过以太网连接或1203-USB或22-SCM-232转换器）。2.在DriveExplorer树视图中，单击22-COMM-E EtherNet/IP，如图1所示。3.单击信息图标以显示适配器的属性屏幕。4.“版本：”字段显示适配器固件的当前版本（例如1.007）。图1 DriveExplorer
窗口中的信息图标提示：
单击使用5.01或更高版本DriveExplorer Lite/Full的22-COMM-E适配器时，适配器固件版本也显示在DriveExplorer窗格的右侧窗格中。步骤2步骤3步骤4 4 22-COMM-E EtherNet/IP适配器固件v1.008使用DriveExecutive 1。启动DriveEx执行程序并使用连接到适配器的驱动器联机。2.在DriveExecutive树视图中，单击22-COMM-E，如图2.3所示。单击信息图标以显示适配器的属性屏幕。4.“版本：”字段显示适配器固件的当前版本（例如1.007）。图2 DriveExecutive窗口固件中的信息图标闪烁本节描述了闪存升级适配器固件的步骤。Allen Bradley网站上提供了驱动器、通信适配器和外围设备的闪存套件。
Linear list of parameter groups
Change parameter DIAG PARAM DSEL MEM SEL device Select DSI device DIAG PARAM DSEL MEM-SEL DSI device PowerFlex 40 22-COMM-E Select diagnostic event device version Device item DIAG PARAM DSEL SEL device version 22-COMM-E EtherNet/IP series: A firmware: 1.007.04 22-COMM E EtherNet/IP adapter firmware v1.008 3 Use DriveExplorer Live/Full 1. Start DriveExplorer and go online using the drive connected to the adapter (via Ethernet connection or 1203-USB or 22-SCM-232 converter). 2. In the DriveExplorer tree view, click 22-COMM-E EtherNet/IP, as shown in Figure 1. 3. Click the Info icon to display the Properties screen for the adapter. 4. The "Version:" field displays the current version of the adapter firmware (for example, 1.007). Figure 1 DriveExplorer
Information icon prompt in the window:
When you click the 22-COMM-E adapter using DriveExplorer Lite/Full version 5.01 or later, the adapter firmware version is also displayed in the right pane of the DriveExplorer pane. Step 2 Step 3 Step 4 4 22-COMM-E EtherNet/IP adapter firmware v1.008 uses DriveExecutive 1. Start the DriveEx executor and go online using the drive connected to the adapter. 2. In the DriveExecutive tree view, click 22-COMM-E, as shown in Figure 2.3. Click the information icon to display the properties screen for the adapter. 4. The "Version:" field displays the current version of the adapter firmware (for example, 1.007). Figure 2 The information icon in the firmware of the DriveExecutive window flashes This section describes the steps to flash upgrade the adapter firmware. Flash kits for drives, communication adapters, and peripherals are available on the Allen Bradley website.
