卡件LT C391AE01 HIEE401782R0001
按照其余屏幕提示操作
直到闪存更新过程完成并显示新固件版本（v2.001）。使用ControlFLASH进行Flash更新1。安装了Flash Kit（请参阅第5页的安装Flash Ki）后，通过选择“开始”>“（所有）程序”>“Flash编程工具”>“ControlFLASH”来启动ControlFLASH。2.在ControlFLASH欢迎屏幕上，单击下一步>。3.从列表中选择20-COMM-M v2.001，然后单击下一步>。重要提示：此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用HIM CopyCat功能、DriveExplorer或DriveExecutive保存配置。4.展开您正在使用的通信路径的树视图，然后选择代表您正在更新的20-COMM-M适配器的驱动器的驱动器图标。然后单击“确定”。5.在显示“找到多个组件”窗口的情况下，从列表中选择“端口X-20-COMM-M”，然后单击“确认”。6.在显示“固件修订”窗口的状态下，从可用更新列表中选择”2.001.xx完整“，然后单击下一步>。按照其余屏幕提示操作，直到闪存过程完成并显示新固件版本（v2.001）。使用超级终端到闪存更新1.安装了闪存套件（请参阅第5页的安装闪存套件）后，启动超级终端并使用连接到适配器的带电源驱动器联机（通过1203-USB或1203-SSS转换器）。2.按Enter键，直到出现主菜单。在主菜单中，按3进行闪存升级。然后按列表中“20-COMM-M”对应的数字键，然后按Y（表示是）更新闪存代码。终端程序将开始显示字母“C”。这向XMODEM协议发出下载可以继续的信号。
Follow the remaining screen prompts
Until the flash update process is complete and the new firmware version (v2.001) is displayed. Use ControlFLASH for Flash Update 1. After installing the Flash Kit (see Installing the Flash Kit on page 5), start ControlFLASH by selecting Start>(All) Programs>Flash Programming Tools>ControlFLASH. 2. On the ControlFLASH welcome screen, click Next>. 3. Select 20-COMM-M v2.001 from the list and click Next>. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using the HIM CopyCat feature, DriveExplorer, or DriveExecutive. 4. Expand the tree view of the communication path you are using, and then select the drive icon representing the drive of the 20-COMM-M adapter you are updating. Then click OK. 5. When the "Multiple Components Found" window is displayed, select "Port X-20-COMM-M" from the list, and then click "OK". 6. With the Firmware Revision window displayed, Select "2.001.xx complete" from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash process is complete and the new firmware version (v2.001) is displayed. Use the HyperTerminal to flash update 1. After installing the flash kit (see Installing the flash kit on page 5), start the HyperTerminal and use the power drive connected to the adapter to go online (via a 1203-USB or 1203-SSS converter) 。 2. Press Enter until the main menu appears. In the main menu, press 3 to upgrade the flash memory. Then press the number key corresponding to "20-COMM-M" in the list, and then press Y to update the flash code. The terminal program will begin to display the letter "C". This signals the XMODEM protocol that the download can continue.
