可控硅5SHY3545L0010/3BHB013088R0001
使用安装了Flash Kit后
启动DriveExplorer并使用连接到适配器的驱动器联机（通过1203-USB或1203-SSS转换器）。2.在DriveExplorer树视图中，单击20-COMM-M适配器。然后单击信息图标，如图1所示，以显示适配器的Properties屏幕。3.在20-COMM-M属性屏幕上，单击详细信息选项卡。重要信息：此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用DriveExplorer或HIM CopyCat功能保存配置。4.要启动闪存更新，请单击闪存更新…按钮。然后从可用更新列表中选择“2.001.xx完整”，然后单击下一步>。按照其余屏幕提示操作，直到闪存更新过程完成并显示新固件版本（v2.001）
使用DriveExecutive到Flash Update
1。安装了Flash Kit（请参阅安装Flash Kid）后，启动DriveEx，并使用连接到适配器的驱动器联机（通过Modbus/TCP或1203-USB或1203-SSS转换器）。2.在DriveExecutive树视图中，单击20-COMM-M适配器。然后单击信息图标，如图2所示，以显示适配器的Properties屏幕。3.在20-COMM-M属性屏幕上，单击组件详细信息选项卡。重要信息：此更新可能会导致适配器参数恢复为默认值。升级前，您可能需要使用DriveExecutive或HIM CopyCat功能保存配置。4.要启动闪存更新，请单击闪存更新按钮。然后从可用设备列表中选择20-COMM-M，然后单击下一步>。6 20-COMM-M Modbus/TCP适配器固件v2.001 5.从可用更新列表中选择“2.001.xx完整”，然后单击下一步>。
After installing the Flash Kit
Start DriveExplorer and go online using the drive connected to the adapter (via a 1203-USB or 1203-SSS converter). 2. In the DriveExplorer tree view, click 20-COMM-M Adapter. Then click the information icon, as shown in Figure 1, to display the Properties screen of the adapter. 3. On the 20-COMM-M Properties screen, click the Details tab. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using DriveExplorer or the HIM CopyCat feature. 4. To start the flash update, click the Flash Update... button. Then select "2.001.xx Complete" from the list of available updates, and click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v2.001) is displayed
Using DriveExecutive to Flash Update
1。 After installing the Flash Kit (see Installing the Flash Kit), start DriveEx and go online using the drive connected to the adapter (via Modbus/TCP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click 20-COMM-M adapter. Then click the information icon, as shown in Figure 2, to display the Properties screen of the adapter. 3. On the 20-COMM-M Properties screen, click the Component Details tab. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to use DriveExecutive or HIM CopyCat to save the configuration. 4. To start the flash update, click the flash update button. Then select 20-COMM-M from the list of available devices, and click Next>. 6 20-COMM-M Modbus/TCP Adapter Firmware v2.001 5. Select "2.001.xx Complete" from the list of available updates and click Next>.
