控制卡DS200SDCCG5A
使用DriveExecutive
1。安装了Flash Kit（请参阅安装闪存套件）后，启动DriveEx，并使用连接到适配器的驱动器联机（通过EtherNet/IP或1203-USB或1203-SSS转换器）。2.在DriveExecutive树状视图中，单击20-COMM-E适配器。然后单击第4页图2所示的信息图标以显示适配器的Properties屏幕。3.在20-COMM-E属性屏幕上，单击组件详细信息选项卡。4.要启动闪存更新，请单击闪存更新按钮。然后从可用设备列表中选择20-COMM-E，然后单击下一步>。5.从可用更新列表中选择“4.002.xx完整”，然后单击下一步>。按照其余屏幕提示操作，直到闪存更新过程完成并显示新固件版本（v4.002）。重要信息：此更新可能会导致适配器参数恢复为默认值。更新之前，您可能需要使用DriveExplorer或HIM CopyCat功能保存配置。重要信息：此更新可能会导致适配器参数恢复为默认值。在更新之前，您可能需要使用DriveExecutive或HIM CopyCat功能保存配置。自动化出版物20COME-RN003A-EN-P-2012年5月6 20-COMM-E EtherNet/IP
适配器固件版本4.002更新
1。安装了Flash工具包（请参阅第5页的安装Flash工具包）后，通过选择开始>（所有）程序>Flash编程工具>ControlFLASH启动ControlFLASH。2.在ControlFLASH欢迎屏幕上，单击下一步>。3.从可用更新列表中选择适当的20-COMM-E更新，然后单击下一步>。4.展开您正在使用的通信路径的树状图，然后选择代表您正在更新的20-COMM-E适配器的驱动器的驱动器图标。然后单击“确定”。5.在显示“找到多个程序集”窗口的情况下，从列表中选择“端口X-20-COMM-E”，然后单击“确认”。6.在显示“固件修订”窗口的状态下，从可用更新列表中选择”4.002.xx完整“，然后单击下一步>。按照其余屏幕提示操作，直到闪存过程完成并显示新固件版本（v4.002）。
Using DriveExecutive
1。 After installing the Flash Kit (see Installing the Flash Kit), start DriveEx and go online using the drive connected to the adapter (via EtherNet/IP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click 20-COMM-E adapter. Then click the information icon shown in Figure 2 on page 4 to display the Properties screen of the adapter. 3. On the 20-COMM-E Properties screen, click the Component Details tab. 4. To start the flash update, click the flash update button. Then select 20-COMM-E from the list of available devices and click Next>. 5. Select "4.002.xx Complete" from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v4.002) is displayed. Important: This update may cause the adapter parameters to return to their default values. Before updating, you may need to save the configuration using DriveExplorer or the HIM CopyCat feature. Important: This update may cause the adapter parameters to return to their default values. You may need to save the configuration using DriveExecutive or HIM CopyCat features before updating. Automation publication 20COME-RN003A-EN-P-2012 May 6 20-COMM-E EtherNet/IP
Adapter firmware version 4.002 update
1。 After installing the Flash kit (see Installing the Flash Kit on page 5), start ControlFLASH by selecting Start>(All) Programs>Flash Programming Tools>ControlFLASH. 2. On the ControlFLASH welcome screen, click Next>. 3. Select the appropriate 20-COMM-E update from the list of available updates, and then click Next>. 4. Expand the tree view of the communication path you are using, and then select the drive icon representing the drive of the 20-COMM-E adapter you are updating. Then click OK. 5. With the "Multiple Assemblies Found" window displayed, select "Port X-20-COMM-E" from the list, and then click "OK". 6. With the Firmware Revision window displayed, select "4.002.xx Complete" from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash process is complete and the new firmware version (v4.002) is displayed.
