IS200DTTCH1A自动化模块备件
输出范围2V
DC至60V DC输出额定值1.0 A，每个通道连续；每个I/O接口断开状态泄漏最大值为3.0 A，每个卡最大本地总线电流（标称12V DC）为1.2 mA，典型值为100 mA，每个卡的最大现场电路功率为150 mA，每个I/O接口可配置通道类型输出离散输出输出在24V DC下保持在控制器提交的最后状态。瞬时输出输出在预先配置的时间段（100 ms至100 s）内有效。连续脉冲输出输出在预配置的基本时间段（100 ms至100 s）中处于活动状态。分辨率=5 ms可选保险丝2.0 A DO卡的简化电路和连接图，8通道，24V DC，高压侧。。
终端故障检测
是仅在以下板卡中工作的功能：DI Plus、32通道、24V DC干触点。DO Plus，32通道，24V DC高压侧。当与M系列质量连接解决方案或P+F HiD或HiC IS屏障和DeltaV DCS终端板结合使用时。所有其他经批准的第三方大规模终端产品可用于非Plus S系列和M系列I/O接口。M系列传统I/O水平载体与S系列水平控制器载体在物理上不兼容。使用M系列控制器安装M系列I/O接口，使用S系列控制器安装S系列I/O接口。DeltaV M系列传统I/O 2022年10月www.emerson。com/deltav 30认证以下认证适用于M系列传统I/O（请参阅每个产品的实际认证）
Output range 2V
DC to 60V DC output rating 1.0 A, each channel continuous; The maximum leakage value of each I/O interface in the disconnected state is 3.0 A, the maximum local bus current (nominal 12V DC) of each card is 1.2 mA, and the typical value is 100 mA. The maximum field circuit power of each card is 150 mA. Each I/O interface can be configured with channel type output discrete output to maintain the last state submitted by the controller at 24V DC. The instantaneous output is valid for a pre configured time period (100 ms to 100 s). The continuous pulse output is active for a pre configured basic time period (100 ms to 100 s). Resolution=5 ms Simplified circuit and connection diagram of optional fuse 2.0 A DO card, 8-channel, 24V DC, high voltage side..
Terminal fault detection
It is a function that only works in the following boards: DI Plus, 32 channels, 24V DC dry contact. DO Plus, 32 channels, 24V DC high voltage side. When used in conjunction with the M series quality connectivity solution or P+F HiD or HiC IS barriers and DeltaV DCS terminal boards. All other approved third-party large-scale terminal products can be used for non Plus S series and M series I/O interfaces. M series traditional I/O horizontal carrier is physically incompatible with S series horizontal controller carrier. Use the M series controller to install the M series I/O interface, and use the S series controller to install the S series I/O interface. DeltaV M Series Traditional I/O October 2022 www emerson。 Com/deltav 30 Certification The following certifications apply to M series traditional I/O (see the actual certification for each product)
