VME-7807RC-414001系统模块卡件
参数规范
输入阻抗1兆欧，直流（仅限TC）CMV，相对于电源系统公共，直流至60 Hz+/-250 VDC或VAC RMS CMRR，50或60 Hz（最大1000欧姆源阻抗）120 dB最小电压，信道间，直流至60Hz+/-250VDC或VAC-RMS串扰，dc至60 Hz 80 dB（50和60 Hz时为120 dB）NMRR，50/60 Hz时为60 dB最小线频积分固定选择50 Hz或60 Hz RTD传感器激励电流1毫安冷端参考（CJR）精度0至+50℃-+/-1.0℃最大-20至+60℃-/-1.5℃最大TC线性化精度2±0.05Ω/℃开路热电偶检测每个转换合格，≤ 1000Ω=保证无跳闸≥ 1500Ω保证跳闸。RTD最大引线电阻15Ω浪涌保护（传感器端子）EN 61000-4-5，每个FTA两对双绞线支持类型（RTD）Pt:100欧姆DIN 4376-180至+800摄氏度Pt:1100欧姆JIS C-1604-180至+650摄氏度Ni:120欧姆ED#7-45至+315摄氏度Cu:10欧姆SEER-20至+250摄氏度支持热电偶类型ANSI规范J-200至+1200摄氏度ANSI规范K-100至+1370摄氏度ANSI规范E-200至+1 000摄氏度ANSI规格T-230至+400摄氏度ANSI规格B+100至+1820℃ANSI规格S 0至+1700℃ANSI规范R 0至+170℃Experion系列C I/O规格，EP03-490-520 16版本1.5霍尼韦尔专有2021 12月参数规范日本R’0至+1770摄氏度支持的毫伏类型-20至+100毫伏FTA尺寸1 2.5 D x 4.9 W x 12.1 L（英寸）63.5 D x 124.46 W x 307.34 L（毫米）注1：FTA为PMIO FTA。这些必须安装在FTA通道中。
C系列通道
这些通道与C系列通道相似，但不相同。TPC将支持此配置。参考PM20-660了解本文件未涵盖的FTA电力、环境和批准认证详情。注2：线性化多项式为四阶多项式，基于NIST专著175、ITS90和JIS C-1602-1995。Experion系列C输入/输出规范，EP03-490-52017版本1.5霍尼韦尔专有2021 12月5.6。低电平模拟（温度）输入–CC-PAIL51功能低电平IOP模块最多支持16通道温度输入。任何单通道均可支持热电偶或电阻温度装置（RTD）输入。与LLMUX（CC-PAIM01）不同，C系列IOTA直接支持16个信道。不需要外部过程管理器FTA。
Parameter specification
Input impedance 1 megohm, DC (TC only) CMV, common to the power system, DC to 60 Hz+/- 250 VDC or VAC RMS CMRR, 50 or 60 Hz (maximum 1000 ohm source impedance) 120 dB minimum voltage, inter channel, DC to 60 Hz+/- 250 VDC or VAC RMS crosstalk, dc to 60 Hz 80 dB (120 dB at 50 and 60 Hz) NMRR, At 50/60 Hz, 60 dB minimum line frequency integration is fixed. 50 Hz or 60 Hz RTD sensor excitation current 1 mA cold end reference (CJR) accuracy 0 to+50 ℃ -+/- 1.0 ℃ maximum - 20 to+60 ℃ -/- 1.5 ℃ maximum TC linearization accuracy 2 ± 0.05 Ω/℃ open circuit thermocouple detects that each conversion is qualified, ≤ 1000 Ω=no trip ≥ 1500 Ω trip guaranteed. Maximum lead resistance of RTD 15 Ω surge protection (sensor terminal) EN 61000-4-5, Two pairs of twisted pair support type (RTD) per FTA Pt: 100 ohm DIN 4376-180 to+800 ° C Pt: 1100 ohm JIS C-1604-180 to+650 ° C Ni: 120 ohm ED # 7-45 to+315 ° C Cu: 10 ohm SEER-20 to+250 ° C Support thermocouple type ANSI specification J-200 to+1200 ° C ANSI specification K-100 to+1370 ° C ANSI specification E-200 to+1 000 ° C ANSI specification T-230 to+400 ° C ANSI specification B+100 to+1820 ° C ANSI specification S 0 to+1700 ° C ANSI specification R 0 to+170 ° C Experion series C I/O specification, EP03-490-520 16 version 1.5 Honeywell proprietary 2021 December parameter specification Japan R'0 to+1770 ℃ supported millivolt type - 20 to+100 millivolt FTA size 1 2.5 D x 4.9 W x 12.1 L (inches) 63.5 D x 124.46 W x 307.34 L (mm) Note 1: FTA is PMIO FTA. These must be installed in the FTA channel.
C-series channel
These channels are similar to, but not identical to, the C-Series channels. TPC will support this configuration. Refer to PM20-660 for details of FTA power, environmental, and approval certifications not covered by this document. Note 2: The linearized polynomial is a fourth order polynomial based on NIST monograph 175, ITS90 and JIS C-1602-1995. Experion Series C input/output specification, EP03-490-52017 version 1.5 Honeywell proprietary December 5.6, 2021. Low level analog (temperature) input – The CC-PAIL51 function low level IOP module supports up to 16 channels of temperature input. Any single channel can support thermocouple or resistance temperature device (RTD) inputs. Unlike LLMUX (CC-PAIM01), the C series IOTA directly supports 16 channels. External process manager FTA is not required.
