IS200ISBDG1AAA机器人模块
规格代码：
AO610 | EAN代码：8712739382204 Facestock一种用于化妆品和食品柔性包装的热密封、银、化学处理的聚酯面层压板。粘合剂涂层三层层压板：PET 12μ/Adh/Alu 9μ/Adh/LLDPE 75μ。应用和使用聚酯面层压袋材料，用于干湿物品的柔性包装，如化妆品面霜、乳液、油和洗发水的产品样品。良好的耐化学性。转换和印刷经过化学处理的PET表面提供可印刷性柔印和UV低迁移油墨胶印。相对较厚的产品具有非常好的尺寸稳定性。实际使用声明：本产品应在最终用户条件下进行彻底测试，以确保其满足特定应用的要求。如果预期用途是食品，情况尤其如此。因此，Avery Dennison要求客户进行充分的测试，以确保预期应用不会造成任何伤害，并且是安全的。保质期为获得最佳性能，在FINAT规定的储存条件（20-25°C；40-50%RH）下，在制造之日起半年内使用本产品。在这些条件下长时间储存可能会缩短保质期。基重111 g/m²ISO 536卡尺96µm ISO 534断裂伸长率CD>55%DIN 53455断裂伸长度MD>70%DIN 53456透氧性（23°C；50%RH）<0.05 cm³/m²/24小时ASTM D3985 2%割线模量MD>850 N/mm²DIN EN ISO 527 T 3 2%割线模数CD>800 N/mm²29/DIN 52 121撕裂埃尔门多夫MD>0.60 N DIN EN 21974
撕裂埃尔门道夫
CD>1.10 N DIN EN21974抗拉强度。MD>35 N/mm²ISO 527-3抗拉强度。CD>35 N/mm²ISO 527-3 WVTR（38°C；90%RH）<0.05 g/m²/24小时ASTM F1249密封强度>35 N/15mm DIN 52529@140°C/5巴/0.5秒COF内/内0.20-0.35μs ASTM D1895 COF外/外0.30-0.45μs ASTMD1895 AO610 Fasson®COSMETIC WEB SILV96 HEAV这是一个自动生成的数据表。所有数据均视为典型值，如有更改，恕不另行通知。始终建议进行进一步测试。如果您想对此数据表提出建议或评论，请发送电子邮件至 V发布日期： 技术信息和建议均基于可靠的测试，但不构成担保或保证。所有Avery Dennison产品都是在买方已独立确定此类产品适用于其目的的情况下销售的。艾利丹尼森的所有产品均按照艾利丹尼逊的一般销售条款和条件销售，请参见http://terms.europe.averydennison.com©2022 Avery Dennison Corporation版权所有。保留所有权利。Avery Dennison和所有其他Avery丹尼森品牌、本出版物、其内容、产品名称和代码均归Avery Dannison Corporation所有。所有其他品牌和产品名称均为其各自所有者的商标。本出版物不得全部或部分用于艾利丹尼森营销以外的任何目的、复制或复制
Specification code:
AO610 | EAN code: 8712739382204 Facestock is a heat sealed, silver and chemically treated polyester faced laminate used for flexible packaging of cosmetics and food. Adhesive coated three-layer laminate: PET 12 μ/ Adh/Alu 9 μ/ Adh/LLDPE 75 μ。 Apply and use polyester laminated bag materials for flexible packaging of dry and wet articles, such as cosmetics face cream, lotion, oil and shampoo product samples. Good chemical resistance. Conversion and printing Chemically treated PET surface provides printability flexography and UV low migration ink offset printing. Relatively thick products have very good dimensional stability. Statement of actual use: This product should be thoroughly tested under the conditions of the end user to ensure that it meets the requirements of the specific application. This is especially true if the intended use is food. Therefore, Avery Dennison requires customers to conduct adequate testing to ensure that the intended application does not cause any harm and is safe. Shelf life To obtain the best performance, use this product within half a year from the date of manufacture under the storage conditions specified by FINAT (20-25 ° C; 40-50% RH). Long term storage under these conditions may shorten the shelf life. Base weight 111 g/m ² ISO 536 Caliper 96 µ m ISO 534 Elongation at break CD>55% DIN 53455 Elongation at break MD>70% DIN 53456 Oxygen permeability (23 ° C; 50% RH)<0.05 cm ³/ m ²/ 24h ASTM D3985 2% secant modulus MD>850 N/mm ² DIN EN ISO 527 T 3 2% secant modulus CD>800 N/mm ² 29/DIN 52 121 Tear Elmendorf MD>0.60 N DIN EN 21974
Tear Elmendorf
CD>1.10 N DIN EN21974 Tensile strength. MD>35 N/mm ² ISO 527-3 Tensile Strength. CD>35 N/mm ² ISO 527-3 WVTR（38°C；90%RH）<0.05 g/m ²/ 24h ASTM F1249 sealing strength>35 N/15mm DIN 52529@140 ° C/5 bar/0.5 sec COF inner/inner 0.20-0.35 μ S ASTM D1895 COF outer/outer 0.30-0.45 μ s ASTMD1895 AO610 Fasson ® COSMETIC WEB SILV96 HEAV This is an automatically generated data table. All data are considered as typical values and are subject to change without notice. Further testing is always recommended. If you would like to make suggestions or comments on this data sheet, please send an email to V Release Date: Technical information and suggestions are based on reliable tests, but do not constitute a warranty or guarantee. All Avery Dennison products are sold when the Buyer has independently determined that such products are suitable for its purpose. All products of Allison Denison are sold in accordance with the general terms and conditions of sale of Allison Denison, see http://terms.europe.averydennison.com © Copyright 2022 Avery Dennison Corporation. All rights reserved. Avery Dennison and all other Avery Dennison brands, this publication, its content, product names and codes are the property of Avery Dennison Corporation. All other brand and product names are trademarks of their respective owners. This publication may not be used, copied or reproduced, in whole or in part, for any purpose other than marketing by Ellie Dennison
