ABB 3BHE005555R0101工控DCS系统备件
型号 选项
1仅当控制信号为1或7时可选择*2对于1或7的控制信号，数字输入为1点。*3仅当控制信号为2、4、5、6或7时，可选择数字输入*4仅当控制信号为2、4、5或6时，可选择此选项。注：对于第1区、第2区和第3区共有的选项，从第3区开始按[P]和[T]的顺序分配它们。2个不同零件的名称时间屏幕模式屏幕1。运行状态（RUN）指示灯亮起。2.运行停止（stop）指示灯处于运行停止状态。3.复位指示当操作被取消并返回到起始点时亮起。4.模式号（PTN）指示5.通过数字输入执行操作时，程序远程（REM）指示灯亮起。6.执行步骤号（STP）指示指示正在执行的步骤号。7.操作功能键时，功能（FNC）操作指示灯亮起。15.设定值（SV）指示16.时间信号（TS1至TS8）指示上部显示屏8.FNC键显示操作屏幕后，按下该键可将控制器置于操作键模式。当显示设置屏幕时，按下该按钮可将控制器置于设置键模式，并操作以向后移动光标。
9.运行键在操作键模式下，它作为运行键运行。当显示设置屏幕时，按下该按钮将控制器置于设置键模式，用于在操作屏幕和模式0的模式屏幕之间切换，或用于从设置屏幕切换到模式屏幕。10.停止键在操作键模式下，它作为停止键操作。当显示设置屏幕时，按下它将控制器置于设置键模式，并用于切换设置屏幕。11.ADV（前进）键在操作键模式下，它作为前进键操作。当显示设置屏幕时，按下该按钮将控制器置于设置键模式，用于移动光标和选择参数。12.复位键在操作键模式下，它作为复位键操作。在显示设置屏幕时，按下该按钮可将控制器置于设置键模式，并用于按降序更改设置值（或选择参数）。13.PTN（模式）键在操作键模式下，它作为模式键操作。在显示设置屏幕时，按下该按钮可将控制器置于设置键模式，并用于按升序更改设置值（或选择参数）。14.ENT键用于注册设置。18.工程端口下显示屏17.准备了各种操作屏幕，并可进行任意选择。在整个节目模式显示屏上，实现了整个节目模式的形状和进展模式位置的同时显示。
Model Options
1 * 2 can be selected only when the control signal is 1 or 7. For the control signal of 1 or 7, the digital input is 1 point* 3 Digital input can be selected only when the control signal is 2, 4, 5, 6 or 7 * 4 This option can be selected only when the control signal is 2, 4, 5 or 6. Note: For the common options of Zone 1, Zone 2 and Zone 3, they are allocated in the order of [P] and [T] starting from Zone 3. Name time screen mode screen 1 for 2 different parts. The RUN indicator lights up. 2. The stop indicator is in the stop state. 3. The reset indication lights up when the operation is cancelled and returns to the starting point. 4. Mode number (PTN) indication 5. The program remote (REM) indicator lights up when an operation is performed through a digital input. 6. The execution step number (STP) indicates the step number being executed. 7. When the function key is operated, the function (FNC) operation indicator lights up. 15. Set value (SV) indication 16. Time signals (TS1 to TS8) indicate the upper display screen 8. After the FNC key displays the operation screen, press the key to place the controller in the operation key mode. When the setting screen is displayed, press this button to place the controller in the setting key mode and operate to move the cursor backward.
9. The run key operates as the run key in the operation key mode. When the setting screen is displayed, press this button to place the controller in the setting key mode, which is used to switch between the operation screen and the mode screen of mode 0, or to switch from the setting screen to the mode screen. 10. The stop key operates as a stop key in the operation key mode. When the setting screen is displayed, press it to place the controller in the setting key mode and use it to switch the setting screen. 11. The ADV key operates as a forward key in the operation key mode. When the setting screen is displayed, press this button to place the controller in the setting key mode for moving the cursor and selecting parameters. 12. The reset key operates as the reset key in the operation key mode. When the setting screen is displayed, press this button to place the controller in the setting key mode and use it to change the setting values (or select parameters) in descending order. 13. The PTN (mode) key operates as a mode key in the operation key mode. When the setting screen is displayed, press this button to place the controller in the setting key mode and use it to change the setting values (or select parameters) in ascending order. 14. ENT key is used to register settings. 18. Lower display screen of engineering port 17. Various operation screens are prepared and can be selected at will. On the display screen of the whole program mode, the shape of the whole program mode and the position of the progress mode are displayed simultaneously.
