CM572自动化工控模块
符号标记
以下符号标记用于产品本身和本说明书中，因此正确理解这些符号标记的含义。符号标记含义警告如果存在死亡或重伤的可能性，则说明了避免这种可能性的预防措施。预防措施如果存在小伤害的可能性或设置器或其外围设备损坏的可能性，则说明了避免这些可能性的预防措施。它是接地端子的符号。始终将接地端子连接到保护接地。高氯酸盐材料本仪器使用高氯酸材料电池。可能需要特殊处理，请参见http://www.dtsc.ca.gov/hazardouswaste/perchlorate警告-4-3。重要警告为了避免严重事故，请务必阅读并理解这些内容。
使用说明
1.确认电源电压和接线在向仪器供电之前，检查接线是否正确，电源电压是否与额定电压匹配，接地是否完成。2.安装过电流保护装置设置器没有电源开关。在设置器的电源中安装与额定规格相匹配的过电流保护装置（断路器等）。3.端子保护为防止触电，为设置器的端子提供安全措施，使用户不能直接接触最终产品。4.安装安全装置关于预期由于设置器和外围设备故障而导致重大损失的装置的使用，始终安装安全装置以防止这些损失，并在最终产品中实施故障安全设计。不要将其用于涉及人类生活、原子能、航空、航天等的重要公共设施。5.请勿将手放在设定器内请勿将手或工具放在设定装置内。您可能会受伤或触电。6.怀疑时切断电源如果有异味、奇怪的噪音或烟雾，或温度异常升高，这是非常危险的，因此立即切断电源，并联系经销商或我们最近的办事处。7.禁止维修和改造如果需要维修或改造，请联系经销商或我们最近的办事处。只有我们公司指定的服务工程师才能更换零件，进行维修和改造。8.严格遵守使用手册为了正确、安全地使用设置器，请遵守本使用手册。请事先了解，我们公司对因错误使用产品而造成的伤害、损坏和被动损坏概不负责。
Symbol mark
The following symbols are used in the product itself and this manual, so the meaning of these symbols is correctly understood. Meaning of the sign Warning If there is a possibility of death or serious injury, the preventive measures to avoid this possibility are described. Preventive measures If there is a possibility of minor injury or damage to the setter or its peripheral equipment, the preventive measures to avoid these possibilities are described. It is the symbol of the grounding terminal. Always connect the ground terminal to the protective ground. Perchlorite material This instrument uses perchloric acid material batteries. Special treatment may be required, see http://www.dtsc.ca.gov/hazardouswaste/perchlorate Warning - 4-3. Important Warning To avoid serious accidents, please read and understand these contents.
instructions
1. Confirm whether the power supply voltage and wiring are correct, whether the power supply voltage matches the rated voltage and whether the grounding is completed before supplying power to the instrument. 2. There is no power switch for installing overcurrent protection device setter. Install over-current protection devices (circuit breakers, etc.) matching the rated specifications in the power supply of the setter. 3. Terminal protection To prevent electric shock, provide safety measures for the terminal of the setter, so that users cannot directly contact the final product. 4. Install safety devices With respect to the use of devices that are expected to cause significant losses due to the failure of the setter and peripheral equipment, always install safety devices to prevent these losses, and implement fail safe design in the final product. Do not use it for important public facilities involving human life, atomic energy, aviation, aerospace, etc. 5. Do not put your hands in the setter. Do not put your hands or tools in the setter. You may be injured or electrocuted. 6. Cut off the power supply in case of doubt. If there is odor, strange noise or smoke, or the temperature rises abnormally, it is very dangerous. Therefore, cut off the power supply immediately and contact the dealer or our nearest office. 7. No repair and transformation If repair or transformation is required, please contact the dealer or our nearest office. Only the service engineers designated by our company can replace parts, repair and transform them. 8. Strictly follow the instruction manual. In order to use the setter correctly and safely, please follow this instruction manual. Please understand in advance that our company is not responsible for the injury, damage and passive damage caused by misuse of the product.
