330704-000-060-10-02-00工控备件
订购信息
有关国家和产品特定批准的详细列表，请参阅Bently.com上的批准快速参考指南（108M1756）。330400加速计330425加速计零件号AA BB A：安装螺纹选项0 1¼-28 UNF整体螺柱0 2 M8 X 1整体螺柱B：机构批准选项0 0无0 5多重批准（CSA、ATEX、IECEx）互连电缆零件号AA A：电缆长度选项（英尺）对于以下列出的电缆，订购增量为1.0英尺（305 mm）。示例：1 5=15英尺（4.57米）2 0=20英尺（6.10米）以下为标准长度英尺米（约）6 1.8 8 2.4 10 3.0 12 3.6 15 4.5 17 5.0 20 6.0 25 7.6 50 15.2 99 30.0也可额外订购非标准/定制长度。电缆零件号130539 3芯屏蔽18 AWG（1.0 mm2）电缆，一端带有3插座插头和氟硅橡胶护套，另一端带有接线片。最小长度为2.0英尺（0.6米），最大长度为99英尺（30米）。有手册可帮助安装该电缆（零件号133080-01）。16925 3芯屏蔽22 AWG（0.5 mm2）电缆，一端带3插座插头，另一端带接线片。最小长度为2.0英尺（0.6米），最大长度为99英尺（30米）。16710 3芯屏蔽22 AWG（0.5 mm2）铠装电缆，一端带3插座插头，另一端带接线片。最小长度为3.0英尺（0.9米），最大长度为99英尺（30米）。附件127088 330400和330425加速计用户指南00531080 330400和330425加速计的匹配连接器。37439-01用于序列号前不带字母“G”的情况。安装底座，¼-28至¼-28.降低底座应变敏感性。37439-02用于序列号前不带字母“G”的情况。安装底座，M8X1至M8X1.降低底座应变敏感性。43217加速计安装套件，用于延伸件零件号108576-01和O形圈零件号04290422，为330400或330425加速计留出空间。
加速计加速度传感器
（参见单独的数据表，文件141630。）6/9 330400和330425加速计加速度传感器数据表141638版本Y图表和图1：加速度传感器尺寸图尺寸单位为毫米（英寸）330400和330425加速计加速传感器数据表41638版本。Y 7/9图2：典型振幅响应图3：10–10000 Hz典型振幅响应详图330400和330425加速度计加速度传感器数据表141638 Rev.Y 8/9版权所有2020贝克休斯公司。保留所有权利。Bently Nevada和Orbit Logo是贝克休斯公司Bently Nevada在美国和其他国家的注册商标。贝克休斯标志是贝克休斯公司的商标。所有其他产品和公司名称均为其各自持有人的商标。商标的使用并不意味着与各自持有人有任何关联或背书。贝克休斯公司以“现状”为基础提供这些信息，用于一般信息目的。贝克休斯不就信息的准确性或完整性作出任何陈述，也不在法律允许的最大范围内做出任何具体、暗示或口头的保证，包括适销性和特定用途的适用性。贝克休斯特此放弃对因使用信息而产生的任何直接、间接、后果性或特殊损害、利润损失索赔或第三方索赔承担任何和所有责任，无论是在合同、侵权行为或其他方面提出索赔。贝克休斯有权随时更改此处所示的规格和特性，或停止所述产品，恕不另行通知或承担任何义务。联系您的贝克休斯代表了解最新信息。本文件中包含的信息是贝克休斯及其附属公司的财产；如有更改，恕不另行通知。它作为服务提供
ordering information
For a detailed list of country and product specific approvals, see Bently Approval Quick Reference Guide (108M1756) on. com. 330400 Accelerometer 330425 Accelerometer Part Number AA BB A: Mounting Thread Option 0 1 ¼- 28 UNF integral stud 0 2 M8 X 1 integral stud B: Agency approved option 0 0 None 0 5 Multiple approvals (CSA, ATEX, IECEx) Interconnect cable part number AA A: Cable length option (feet) For the cables listed below, order in increments of 1.0 feet (305 mm). Example: 1 5=15 feet (4.57 meters) 2 0=20 feet (6.10 meters) below is the standard length feet meters (approximately) 6 1.8 8 2.4 10 3.0 12 3.6 15 4.5 17 5.0 20 6.0 25 7.6 50 15.2 99 30.0 Additional non-standard/custom lengths can also be ordered. Cable part number 130539 3-core shielded 18 AWG (1.0 mm2) cable with a 3-socket plug and fluorosilicone rubber sheath at one end and a lug at the other end. The minimum length is 2.0 feet (0.6 meters) and the maximum length is 99 feet (30 meters). A manual is available to help install the cable (part number 133080-01). 16925 3-core shielded 22 AWG (0.5 mm2) cable with 3 socket plugs at one end and lug at the other end. The minimum length is 2.0 feet (0.6 meters) and the maximum length is 99 feet (30 meters). 16710 3-core shielded 22 AWG (0.5 mm2) armored cable with 3 socket plugs at one end and lug at the other end. The minimum length is 3.0 feet (0.9 meters) and the maximum length is 99 feet (30 meters). Attachment 127,088 330,400 and 330,425 Accelerometer User Guide 00,531,080 Matching Connectors for 330,400 and 330,425 Accelerometers. 37439-01 is used when there is no letter "G" before the serial number. Mounting base, ¼- 28 to ¼- 28. Reduce the base strain sensitivity. 37439-02 is used when there is no letter "G" before the serial number. Mount the base, M8X1 to M8X1. Reduce the base strain sensitivity. 43217 Accelerometer mounting kit for extension part number 108576-01 and O-ring part number 04290422 to make room for 330400 or 330425 accelerometers.
Accelerometer accelerometer
(See separate data sheet, document 141630.) 6/9 330400 and 330425 Accelerometers Accelerometers Accelerometers Data Sheets 141638 Version Y Chart and Figure 1: Accelerometers Dimensions in millimeters (inches) 330400 and 330425 Accelerometers Accelerometers Data Sheets 41638 Version. Y 7/9 Figure 2: Typical Amplitude Response Figure 3: 10 – 10,000 Hz Typical Amplitude Response Details 330,400 and 330,425 Accelerometers Accelerometer Data Sheet 141,638 Rev. Y 8/9 Copyright 2020 Baker Hughes. All rights reserved. Bently Nevada and Orbit Logo are registered trademarks of Baker Hughes Bently Nevada in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes. All other product and company names are trademarks of their respective holders. The use of trademarks does not imply any association or endorsement with their respective holders. Baker Hughes provides this information on an "as is" basis for general information purposes. Baker Hughes does not make any statement about the accuracy or completeness of the information, nor does it make any specific, implied or oral guarantee to the maximum extent permitted by law, including marketability and applicability for a particular purpose. Baker Hughes hereby waives any and all liability for any direct, indirect, consequential or special damages, claims for loss of profits or claims of third parties arising from the use of information, whether in contract, tort or otherwise. Baker Hughes reserves the right to change the specifications and characteristics shown herein at any time, or to discontinue the products without notice or obligation. Contact your Baker Hughes representative for the latest information. The information contained in this document is the property of Baker Hughes and its affiliates; Subject to change without notice. It is provided as a service
