330106-05-30-05-02-00探头传感器
配置ID
包含一个唯一的六字符标识符，当配置下载到3500机架时输入该标识符。后端口机架接口输入/输出模块上标记为主机的端口，用于将3500机架连接到3500主机或3500机架菊花链连接到更靠近3500主机。I/O选项3500监测系统可用的两种机架接口I/O模块是RS-232/RS-422 I/O模块和调制解调器I/O模块。RS-232/RS-422 I/O模块包含一个9针主机连接器，该连接器包含RS-232或RS-422电平信号，具体取决于I/O模块开关的位置。调制解调器I/O模块有一个RJ11连接器，并包含一个内部调制解调器。3配置信息3500/20操作和维护8外部调制解调器当配置RS-232/RS-422输入/输出模块时，机架接口模块直接支持以下外部调制解调器：无Hayes Ultra 9600 Hayes Optima 9600 Motorola FasTalkII 9600自定义初始化字符串设置和启动调制解调器的命令。如果从列表中选择调制解调器，默认初始化字符串将显示在此字段中。如果选择“自定义”，请根据调制解调器文档中的信息输入初始化字符串。字节超时在通信被认为完成之前，通信线路必须空闲的字节次数。一字节时间是所选波特率的函数。
连接密码
值的范围为3至255。连接密码提供对3500机架的只读访问。如果此字段中输入的密码与机架配置软件“连接”屏幕或数据采集/DDE服务器软件“设置”屏幕中输入的口令不匹配，则不允许与3500机架通信。该密码存储在机架接口模块的非易失性存储器中。配置密码提供对3500机架的配置写入访问。如果此字段中输入的密码与机架配置软件“下载”屏幕中输入的口令不匹配，3500机架将不接受新配置。通过操作员显示软件更改3500机架中的设定值也需要该密码。该密码存储在机架接口模块的非易失性存储器中。仅在编程模式下更改设置点如果钥匙锁处于编程模式位置，则仅允许更改任何监视器中的设置点。如果键处于运行位置，则不允许更改设定点。前端口机架接口模块前面标有配置端口的端口，主要用于通过个人计算机配置3500机架。该端口还可用于检索机械数据，以便使用数据采集/DDE服务器软件和操作员显示软件进行显示。该端口仅支持RS-232，仅提供对一个机架的访问
Configuration ID
Contains a unique six character identifier that is entered when the configuration is downloaded to the 3500 rack. The port labeled Host on the Rear Port Rack Interface I/O Module that connects a 3500 rack to a 3500 host or a 3500 rack daisy chain to a 3500 host closer. The two types of Rack Interface I/O modules available with the I/O Option 3500 Monitoring System are RS-232/RS-422 I/O modules and modem I/O modules. The RS-232/RS-422 I/O module contains a 9-pin host connector that contains RS-232 or RS-422 level signals, depending on the position of the I/O module switch. The modem I/O module has an RJ11 connector and contains an internal modem. 3 Configuration information 3500/20 Operation and maintenance 8 External modemWhen configuring the RS-232/RS-422 I/O module, the Rack Interface Module directly supports the following external modems: no Hayes Ultra 9600 Hayes Optima 9600 Motorola FasTalkII 9600 custom initialization string settings and the command to start the modem. If you select a modem from the list, the default initialization string appears in this field. If you select Custom, enter the initialization string according to the information in the modem documentation. Byte timeout The number of bytes that the communication line must be idle before communication is considered complete. One byte time is a function of the selected baud rate.
Connection password
Values range from 3 to 255. The connection password provides read-only access to the 3500 rack. If the password entered in this field does not match the password entered in the Rack Configuration Software Connect screen or the Data Acquisition/DDE Server Software Setup screen, communication with the 3500 rack is not allowed. The password is stored in the nonvolatile memory of the Rack Interface Module. The configuration password provides configuration write access to the 3500 rack. If the password entered in this field does not match the password entered on the Download screen of the Rack Configuration Software, the 3500 rack will not accept the new configuration. This password is also required to change the settings in the 3500 rack through the operator display software. The password is stored in the nonvolatile memory of the Rack Interface Module. Changing setpoints only in programming modeIf the key lock is in the programming mode position, only changing setpoints in any monitor is allowed. If the key is in the RUN position, it is not allowed to change the setpoint. The port on the front of the Front Port Rack Interface Module that is marked with a configuration port is primarily used to configure a 3500 rack through a personal computer. This port can also be used to retrieve mechanical data for display using data acquisition/DDE server software and operator display software. This port only supports RS-232 and provides access to only one rack
