DAI03 工控备件
如果一种材料由多个子材料组成
（例如，由子材料基本聚合物、母料颜色颜料和母料阻燃剂组成的填充热塑性材料），则必须在材料顶部节点满足未指定物质总量的限制。在子材料层面，未指明物质的比例可能更高。印刷副本为非受控国际材料数据系统IMDS建议IMDS 001 2007年3月IMDS指导委员会编制第10页，共13页测试材料10 g聚酰胺95%聚酰胺12 100%母料5%二氧化钛60%杂项。，不申报40%4示例4.1有效结构的图形打印副本不受控制国际材料数据系统IMDS建议IMDS 001 2007年3月IMDS指导委员会发布第11页，共13页4.2错误不允许以下结构：1。缺少料位（由于系统检查，现在无法创建MDS）支架碳硫铁锰磷铁管碳硫铁锰磷结构错误，因为结构错误，由于料位丢失；材料水平缺失；自2.0版起，该故障由系统检查自2.0版以来，该故障被系统2检查。在一个结构级别中，没有子组件/零件和不同符号的组件只能包含子组件和/或单个零件，而不能包含材料。在一个结构层中，只能使用相同类型的元件。它确实提供了一份更容易理解的数据表。管组件St37…碳铜铁支架DC04；St 4；St14碳硫铁磷锰印刷品为非受控国际材料数据系统IMDS建议IMDS 001 2007年3月IMDS指导委员会编制第12页，共13页。同一材料不应在同一结构层上放置两次。如果一个零件或子零件由两种相同的材料组成，则这些材料应结合为一种材料，其重量为两种材料的重量。管组件支架DC04；St 4；St14碳硫铁磷锰DC04；St 4；St14碳硫铁锰磷印刷品为不受控制的国际材料数据系统IMDS建议IMDS 001 2007年3月IMDS指导委员会编制第13页，共13页5发布和修订5.1发布该建议于2002年12月13日首次批准并发布。
基本物质水平
日期描述/原因发起委员会2003年8月1日IMDS SC 2 24.09.03材料和基本物质水平的更好定义IMDS SC 3 30.10.03编辑修改IMDS SC 1，3.5.2和3.5.4 IMDS SC 2005年12月4日3.2.2.3定义FBOM 3.2.3重量范围规范3.3.2半部件的扩展描述和示例3.3.3半部件的部分范围3.4.2材料的扩展定义和描述3.4.3材料的部分范围3.5.2基本物质的扩展描述3.5.4.10使用通配符的示例更改IMDS SC 2007年3月5日适用于4.0版的检查程序：3.3.3半部件范围3.4.2字段更新（4.0版），标准材料编号/内部材料编号。定义3.5.2根据不同分类调整的物质范围4.2示例增加了额外的编辑更改该内部规范必须是交付条件的一部分。必须在备注栏中注明此例外情况•IMDS指导委员会（IMDS委员会、IMDS委员会/ILI金属、Stahl und Eisen Liste）的所有材料基本物质细分为四种不同的“物质类型”1.基本物质/成分包括材料的主要成分（成分），如基本聚合物、填料。此信息是必填的。2.申报物质，必须根据GADSL清单（前ILRS、VDA 232-101、GMW3059、福特WSS-M99P9999-A1（Hex9）、TSZ0001G）申报的物质，因为它们有义务申报和/或被禁止。这些物质以彩色字母出现在IMDS中，不能标记为机密（见下一节）。3.机密物质不可申报和/或禁止物质（即不属于GADSL清单的物质，黑色字符）可根据若干规则标记为“机密”（总计不超过同类材料的10%）。这些数据只能由“受信任的用户”看到。这些可信用户可以由IMDS创建公司的客户经理定义，并且是OEM或其他供应商的员工。因此，数据表的创建公司仍然是数据所有者。沿着流程/供应链，这些信息仅对这些受信任的用户可见。
If a material consists of several sub materials
(For example, a filled thermoplastic material consisting of a sub material basic polymer, a masterbatch color pigment, and a masterbatch flame retardant), the limit on the total amount of unspecified substances must be met at the top node of the material. At the sub material level, the proportion of unspecified substances may be higher. Printed copy is Uncontrolled International Material Data System IMDS Recommendation IMDS 001, prepared by IMDS Steering Committee in March 2007 Page 10 of 13 Test materials 10 g polyamide 95% polyamide 12 100% master batch 5% titanium dioxide 60% Miscellaneous., Do not declare 40% 4 Example 4.1 Graphic print copy of valid structure Uncontrolled International Material Data System IMDS Recommendation IMDS 001 March 2007 IMDS Steering Committee issued Page 11 of 13 4.2 Errors do not allow the following structure: 1. Lack of material level (MDS cannot be created now due to system inspection) The support carbon sulfur iron manganese phosphorus iron tube carbon sulfur iron manganese phosphorus structure is wrong, because of the structure error, because the material level is lost; Material level missing; Since version 2.0, the fault has been checked by the system. Since version 2.0, the fault has been checked by system 2. In a structure level, components without sub assemblies/parts and different symbols can only contain sub assemblies and/or individual parts, not materials. In a structure layer, only components of the same type can be used. It does provide a more understandable data table. Pipe assembly St37... carbon copper iron support DC04; St 4； St14 carbon, sulfur, iron, phosphorus and manganese printed materials are IMDS recommendations of uncontrolled international material data system IMDS 001, prepared by IMDS Steering Committee in March 2007 Page 12 of 13. The same material shall not be placed twice on the same structural layer. If a part or sub part is composed of two identical materials, these materials shall be combined into one material with the weight of the two materials. Pipe assembly support DC04; St 4； St14 carbon sulfur iron phosphorus manganese DC04; St 4； St14 carbon, sulfur, iron, manganese and phosphorus printed matter is an uncontrolled international material data system IMDS recommendation IMDS 001 March 2007 IMDS Steering Committee prepared Page 13 of 13 5 Released and revised 5.1 Released This recommendation was first approved and issued on December 13, 2002.
Basic material level
Date Description/Reason Launch Committee 1 August 2003 IMDS SC 2 24.09.03 Better definition of material and basic substance levels IMDS SC 3 30.10.03 Edited and revised IMDS SC 1, 3.5.2 and 3.5.4 IMDS SC 4 December 2005 3.2.2.3 Definition FBOM 3.2.3 Weight range specification 3.3.2 Extended description and example of half components 3.3.3 Partial scope of half components 3.4.2 Extended definition and description of materials 3.4.3 Partial scope of materials 3.5.2 Extended description of basic substances 3.5.4.1 0 Example of using wildcard characters to change the inspection procedure of IMDS SC March 5, 2007 applicable to version 4.0: 3.3.3 Half part range 3.4.2 Field update (version 4.0), standard material number/internal material number. Definition 3.5.2 Example of substance scope 4.2 adjusted according to different classifications with additional editorial changes This internal specification must be part of the delivery conditions. This exception must be noted in the remark column • All material basic substances of the IMDS Steering Committee (IMDS Committee, IMDS Committee/ILI Metals, Stahl und Eisen Listen) are subdivided into four different "substance types" 1. The basic substances/ingredients include the main components (compositions) of the materials, such as basic polymers and fillers. This information is required. 2. Declared substances must be declared according to the GADSL list (former ILRS, VDA 232-101, GMW3059, Ford WSS-M99P9999-A1 (Hex 9), TSZ0001G), because they are obliged to declare and/or prohibited. These substances appear in color letters in IMDS and cannot be marked as confidential (see next section). 3. Non declarable and/or prohibited substances of confidential substances (i.e. substances not included in the GADSL list, black characters) can be marked as "confidential" according to several rules (no more than 10% of similar materials in total). This data can only be seen by Trusted Users. These trusted users can be defined by the account manager of the IMDS creation company and are employees of OEM or other suppliers. Therefore, the company that created the data table is still the data owner. Along the process/supply chain, this information is only visible to these trusted users.
