5736045-N DSMD113 控制器模块
编程软件配置器功能
说明32点–四个独立组，每组8点•正逻辑兼容性•接近开关兼容性•输入滤波器可选–1mS或10mS•一个输入可配置为中断•配置为IC697MDL653 HE697DIM103是一个21伏至30伏直流正逻辑输入模块，在四个独立的组中提供32个输入点，每组8个点。输入电流-电压特性符合IEC标准（类型1）规范。模块顶部包括LED指示灯，指示电路逻辑（PLC）侧各点的开-关状态。该模块采用机械键控，以确保现场使用类似类型的模块进行正确更换。I/O参考可由用户配置，无需在模块上使用跳线或DIP开关。通过安装在编程设备上的IC641编程软件配置器功能完成配置。编程设备可以是IC647或IC640工业计算机、IBM PS/2、XT、AT或兼容的个人计算机。
Programming software configurator functions
Description 32 points – four independent groups, each with 8 points • Positive logic compatibility • Proximity switch compatibility • Optional input filter – 1mS or 10mS • One input can be configured as interrupt • IC697MDL653 HE697DIM103 is a 21 V to 30 V DC positive logic input module, which provides 32 input points in four independent groups, each with 8 points. The input current voltage characteristics comply with IEC standard (type 1) specifications. The top of the module includes LED indicators to indicate the on-off status of each point on the circuit logic (PLC) side. The module is mechanically keyed to ensure that similar types of modules are properly replaced on site. The I/O reference can be configured by the user without using jumpers or DIP switches on the module. The configuration is completed through the IC641 programming software configurator function installed on the programming device. The programming device can be an IC647 or IC640 industrial computer, an IBM PS/2, XT, AT, or a compatible personal computer.
该输入模块仅设计用于正逻辑特性
因此，将电流从输入设备提供给用户公共线。输入设备连接在电源总线和模块输入之间。该模块与多种输入设备兼容，例如：•按钮、限位开关、选择器开关；•电子接近开关，2线和3线。此外，该模块上的输入可由任何IC697 PLC电压兼容输出模块直接驱动。输入电路提供足够的电流以确保开关装置的可靠操作。在接通状态下，输入电流通常为10mA，在断开状态下可以接受高达1mA的泄漏电流，而无需接通。三线接近开关很容易应用，因为它们在接通状态提供低电压降，在断状态提供低泄漏电流。双线接近开关的电源来自信号连接；因此，接通状态电压和断开状态泄漏电流都高于3线装置。该模块被设计为与许多这样的2线设备兼容；然而，必须仔细评估每种设备类型在ON和OFF状态下的兼容性。
This input module is designed for positive logic characteristics only
Therefore, the current is supplied from the input device to the user common. The input device is connected between the power bus and the module input. The module is compatible with a variety of input devices, such as: • buttons, limit switches, selector switches; • Electronic proximity switch, 2-wire and 3-wire. In addition, the inputs on this module can be directly driven by any IC697 PLC voltage compatible output module. The input circuit provides sufficient current to ensure reliable operation of the switchgear. In the on state, the input current is usually 10mA, and in the off state, the leakage current up to 1mA can be accepted without switching on. Three wire proximity switches are easy to apply because they provide low voltage drop in the on state and low leakage current in the off state. The power supply of the two-wire proximity switch comes from the signal connection; Therefore, both the on state voltage and the off state leakage current are higher than the 3-wire device. The module is designed to be compatible with many such 2-wire devices; However, the compatibility of each device type in the ON and OFF states must be carefully evaluated.
