产品详情介绍
ALSTOM V4555724-0100脉冲卡件
连接器保护器。包装包含10对连接器保护器，用于3300 XL 8 mm探针和延长电缆。如果您的应用需要与安装位置进行额外的电气隔离（如某些发电机和电机轴承位置），我们建议使用酚醛螺纹安装支架。-01选项包括两个10-24 UNC2A安装螺钉。-04选项包括两个M5 x 0.8-6g安装螺钉。安装螺钉有预先钻好的安全线孔。硅胶自熔胶带。一卷9.1米（10码）长的硅胶胶带，用于保护连接器。该胶带易于安装，并提供良好的电气隔离和环境保护。我们不建议在机器外壳内使用此胶带。40113-02连接器保护器套件。3300 XL 8 mm探针和延长电缆的连接器保护器套件，包括连接器保护器和安装工具。136536-01连接器保护器适配器。这允许您使用1998年之前生产的连接器保护器安装工具，以及75ΩClickLoc连接器。75Ω三轴公接头保护器。公连接器保护器安装在延长电缆上，并连接到探针上的母连接器保护器，为连接器提供环境保护。母连接器保护器安装在探针导线上，并连接到延长电缆上的公连接器保护器，为连接器提供环境保护。您还可以将连接器保护器放在延长电缆上，以滑动到前置器传感器的连接上，保护该连接不受环境影响。
3300 XL ETR连接器套件
用于ETR 3300 XL 8mm探头和3300 ETR XL延长电缆。包含一对公螺纹和母螺纹ClickLoc连接器、两个彩色编码套管、两条高温割缝FEP管和一条硅胶带。163356连接器压接工具包。包括1套多连接器插件和连接器安装说明。仅与330153连接器套件或2003年出货的探头兼容，或与未安装ClickLoc连接器的更高版本兼容。提供手提箱。
1.探针头，直径8.0 mm（0.31 in），3/8-24螺纹为2.9/16 in，M10螺纹为M17（见注2）3.外壳螺纹为4.5/16 in扳手平面，3/8-二十四螺纹；用于M10螺纹的8mm扳手平面。5.75Ω电缆，最大外径3.68 mm（0.145 in），FluidLoc电缆最大外径3.94 mm（0.155 in），铠装外径7.67 mm（0.302 in），护甲套圈最大直径9.5 mm（0.38 in）6.微型公同轴连接器，最大外径7.24 mm（0.285 in）“D”7.无螺纹长度“A”8.外壳长度“B”9.最大6.0 mm（0.235 in）10。总长度“C”，+30%，-0%3 75Ω电缆，最大直径3.68 mm（0.145 in），FluidLoc电缆最大直径3.94 mm（0.155 in），带铠装的外径7.67 mm（0.302 in），铠装套圈FEP或PFA涂层铠装的最大直径10.2 mm（0.4 in），装甲长度小于电缆长度300 mm（11.8 in）（见注6）4.75Ω电缆，3.7 mm（0.15 in）最大外径，FluidLoc电缆的最大直径为3.94 mm（0.155 in），铠装的最大外径为7.67 mm（0.302 in），护面套圈的最大直径是10.2 mm（0.40 in）
Connector protectors.
Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. We recommend the phenolic threaded mounting bracket if your application requires additional electric isolation from the mounting location (as in some generator and electrical motor bearing locations). The -01 option includes two 10-24 UNC2A mounting screws. The -04 option includes two M5 x 0.8-6g mounting screws. The mounting screws have pre-drilled holes for safety wire.Silicone self-fusing tape. A 9. 1 - metre (10 -yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. 40113 -02 Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. 136536 -01 Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors.75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors.Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment.
3300 XL ETR Connector Kit.
Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. 163356 Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case.
1. Probe tip, 8.0 mm (0.31 in) diameter 2. 9/16 in for 3/8-24 threads, M17 for M10 threads (see Note 2) 3. Case thread 4. 5/16 in wrench flats for 3/8-24 threads; 8mm wrench flats for M10 threads. 5. 75Ω cable, 3.68 mm (0.145 in) maximum outside diameter, 3.94 mm (0.155 in) maximum outside diameter for FluidLoc cable, 7.67 mm (0.302 in) outside diameter of armor, 9.5 mm (0.38 in) maximum diameter of armor ferrule 6. Miniature male coaxial connector, 7.24 mm (0.285 in) maximum outside diameter “D” 7. Unthreaded length “A” 8. Case length “B” 9. 6.0 mm (0.235 in) maximum 10. Total length “C”, +30%, -0%3 75Ω cable, 3.68 mm (0.145 in) maximum diameter, 3.94 mm (0.155 in) maximum diameter for FluidLoc cable, 7.67 mm (0.302 in) outside diameter with armor, 10.2 mm (0.4 in) maximum diameter for armor ferrule FEP or PFA coated armor, armor length 300 mm (11.8 in) less than cable length (see Note 6) 4. 75Ω cable, 3.7 mm (0.15 in) maximum outside diameter, 3.94 mm (0.155 in) maximum diameter for FluidLoc cable, 7.67 mm (0.302 in) maximum outside diameter of armor, 10.2 mm (0.40 in) maximum diameter of armor ferrule
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
