产品详情介绍
Honeywell 51304511-200 NIM输入调器模块
允许系统总线模块运行作为路由器并将数据包转发到其他网络节点。默认设置：停用ICMP模式Internet控制消息协议（ICMP）允许更高层的协议层检测网络层上的错误状态并优化数据包的传输。处理器模块支持的Internet控制消息协议（ICMP）的消息类型：无ICMP响应所有ICMP命令均被停用。这可确保高度安全，防止网络上可能发生的潜在破坏。回声响应如果激活了回声响应，节点将响应ping命令。因此，可以确定是否可以访问节点。安全性仍然很高。主机无法访问对用户来说不重要。仅用于在制造商工厂进行测试。所有已实现的ICMP响应所有ICMP命令均被激活。这样可以更详细地诊断网络故障。默认设置：回声响应
如果支持VLAN，则应关闭基于端口的VLAN，以使每个端口能够与其他交换机端口通信。对于一台交换机上的每个端口，用户可以定义交换机接收到的以太网帧可以发送到哪些其他端口。VLAN选项卡中的表包含两个端口之间的连接可以设置为活动或非活动的条目。默认设置：端口之间的所有连接活动LLDP使用LLDP（链路层发现协议），MAC地址、设备名称、端口号等信息通过自己的设备定期通过多播发送，并从相邻设备接收。LLDP根据通信模块上是否配置了PROFINET，使用以下值。
在SILworX事件定义中配置事件
为每个事件定义一个全局变量。通常使用已经为程序定义的全局变量。2.在资源下方，创建一个新的报警和事件分支（如果不存在）。3.在报警和事件编辑器中定义事件。-将全局变量拖动到布尔或标量事件的事件窗口中。-定义事件的详细信息，见表22和表23。事件已定义。有关更多信息，请参阅SILworX联机帮助。布尔事件的参数必须输入具有以下列的表格中：镜像用于配置模块是否应在给定端口上复制以太网数据包，以便可以从连接到该端口的设备读取这些数据包，例如，出于测试目的。以下参数定义了给定端口的工作方式：关闭此端口不参与镜像过程。出口：此端口的传出数据重复。入口：此端口的传入数据重复。入口/出口：此端口的输入和输出数据重复。目的端口：此端口用于发送重复数据。默认设置：OFF CPU事件处理器模块创建时间戳。它在每个周期中创建所有事件。I/O事件一个合适的I/O模块（如AI 32 02）创建时间戳。自动事件时间戳由合适的I/O模块创建（如果已分配），否则由处理器模块创建。
CPU事件处理器模块创建时间戳。它在每个周期中创建所有事件。I/O事件一个合适的I/O模块（如AI 32 02）创建时间戳。自动事件时间戳由合适的I/O模块创建（如果已分配），否则由处理器模块创建。
Allow a system bus module to operate
as router and to forward data packets to other network nodes. Default setting: Deactivated ICMP Mode The Internet Control Message Protocol (ICMP) allows the higher protocol layers to detect error states on the network layer and optimize the transmission of data packets. Message types of Internet Control Message Protocol (ICMP) supported by the processor module: No ICMP Responses All the ICMP commands are deactivated. This ensures a high degree of safety against potential sabotage that might occur over the network. Echo Response If Echo Response is activated, the node responds to a ping command. It is thus possible to determine if a node can be reached. Safety is still high. Host Unreachable Not important for the user. Only used for testing at the manufacturer's facility. All Implemented ICMP Responses All ICMP commands are activated. This allows a more detailed diagnosis of network malfunctions. Default setting: Echo Response
Should VLAN be supported, port-based VLAN should be off to enable each port to communicate with the other switch ports. For each port on one switch, the user can define which other ports of the switch received Ethernet frames may be sent to. The table in the VLAN tab contains entries through which the connection between two ports can be set as active or inactive. Default setting: All connection between ports active LLDP With LLDP (Link Layer Discovery Protocol), information such as MAC address, device name, port number is sent per multicast in periodic intervals via the own device and is received from the neighboring devices. LLDP uses the following values depending on whether PROFINET is configured on the communication module.
Configuring Events in SILworX Event Definition
Define a global variable for each event. Generally use global variables that have already been defined for the program. 2. Below the resource, create a new Alarm & Events branch, if not existing. 3. Define events in the Alarm & Event Editor. - Drag global variables into the event window for Boolean or scalar events. - Define the details of the events, see Table 22 and Table 23. The events are defines. For further information, refer to the SILworX online help. The parameters of the Boolean events must be entered in a table with the following columns: Mirroring is used to configure whether the module should duplicate Ethernet packets on a given port such that they can be read from a device connected to that port, e.g., for test purposes. The following parameters define how a given port should work: Off This port does not participate to the mirroring process. Egress: Outgoing data of this port are duplicated. Ingress: Incoming data of this port are duplicated. Ingress/Egress: Incoming and outgoing data of this port are duplicated. Dest Port: This port is used to send duplicated data. Default setting: OFF CPU event The processor module creates the timestamp. It creates all the events in each of its cycle. I/O event A suitable I/O module (e.g., AI 32 02) creates the timestamp. Auto event The timestamp is created by a suitable I/O module, if assigned, otherwise by the processor module.
CPU event The processor module creates the timestamp. It creates all the events in each of its cycle. I/O event A suitable I/O module (e.g., AI 32 02) creates the timestamp. Auto event The timestamp is created by a suitable I/O module, if assigned, otherwise by the processor module.
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
