产品内容介绍
ACUREX 43552-010主控制板连接
ADC和Logix存储器从RSLogix 5000软件版本16.00开始，驱动器配置设置已存储在项目的ACD文件中，该文件下载并存储在控制器。
支持ADC的设备的配置设置包含其他端口和脚本信息来编排下载过程，因此与中的PowerFlex 750系列驱动器相比，使用了额外的Logix内存RSLogix 5000软件，版本16.00…19.00系统。
请注意以下示例内存使用：
•PowerFlex 755驱动器，无可选模块，参数最少更改为默认值，并且没有DeviceLogix程序消耗每个驱动器大约8.5 KB的Logix内存。
•带有四个选项模块的PowerFlex 755驱动器，约50个更改参数，32块DeviceLogix程序消耗每个驱动器大约有25 KB的Logix内存。大多数Logix控制器都有兆字节的可用内存，因此通常不应该成为问题。
您可以在中监视Logix内存使用情况RSLogix 5000软件。在控制器属性对话框中，单击内存选项卡。
在Logix控制器中存储驱动器和外围设备的固件（固件管理器）Logix Firmware Supervisor（Logix固件管理器）功能已扩展为提供固件更新连接到驱动器的外围设备。
您必须在线并加入控制器加载/存储固件管理器设置的程序模式。
配置控制器以检查和刷新驱动器的正确固件和外围设备，请执行以下步骤。
1.验证是否在驱动器和外围设备中选择了“完全匹配”键控属性对话框。
a、 单击常规选项卡以查看驱动器的键控。
b、 右键单击驱动器选项卡上的每个外围设备，然后选择属性查看外围设备的键控。
2.验证每个固件版本的ControlFLASH固件套件应该存储在控制器中的每个设备都已安装在运行RSLogix 5000软件的计算机。
3.验证CompactFlash或其他存储卡是否已安装在控制器。
4.使用RSLogix 5000软件与程序中的控制器联机模式
5.如果尚未下载程序，请下载。
6.在树视图中，右键单击控制器顶部的控制器文件夹管理器，然后选择“属性”。
7.在控制器属性对话框中，单击非易失性内存选项卡。9.从自动固件更新下拉菜单中，选择启用并将文件存储到图像。
10.单击<--Store。
您可能会看到与以下内容相关的两个不同的继续确认对话框通信中断和当前内容的擦除存储卡。如果确定，请在任一对话框中单击“是”。
11.RSLogix 5000软件将进入脱机状态，如下所示对话框将出现。
ADC and Logix Memory
Starting in RSLogix 5000 software, version 16.00, drive configuration settings have been stored in the project's ACD file which is downloaded and stored in the controller. Configuration settings for ADC-capable devices contain additional port and scripting information to choreograph the download process, so additional Logix memory is used compared with PowerFlex 750-Series drives in RSLogix 5000 software, version 16.00…19.00 systems. Note these examples of memory usage: • A PowerFlex 755 drive with no option modules, minimal parameters changed from defaults, and no DeviceLogix program consumes approximately 8.5 kilobytes of Logix memory per drive. • A PowerFlex 755 drive with four option modules, approximately 50 changed parameters, and a 32-block DeviceLogix program consumes approximately 25 kilobytes of Logix memory per drive. The majority of Logix controllers have megabytes of memory available, so this typically should not be an issue. You can monitor Logix memory usage in RSLogix 5000 software. From the Controller Properties dialog box, click the Memory tab.
Storing the Drive’s and Peripherals’ Firmware in the Logix Controller
The Logix Firmware Supervisor function has been extended to provide firmware updates for the peripherals connected to the drive. You must be online and in program mode with the controller to load/store the firmware supervisor settings. To configure the controller to check and refresh the correct firmware for the drive and peripherals, perform the following steps. 1. Verify that “Exact Match” keying is selected in the drive’s and peripherals’ properties dialog boxes. a. Click the General tab to view the drive’s keying. b. Right-click each peripheral on the Drive tab and choose Properties to view the peripheral’s keying. 2. Verify that ControlFLASH firmware kits for each revision of firmware for each device that should be stored in the controller have been installed on the computer running RSLogix 5000 software. 3. Verify that a CompactFlash or other storage card has been installed in the controller. 4. Use RSLogix 5000 software to go online with the controller in Program mode. 5. Download your program if you have not done so already. 6. In the treeview, right-click the controller folder at the top of the Controller Organizer and choose Properties. 7. On the Controller Properties dialog box, click the Nonvolatile Memory tab.9. From the Automatic Firmware Update pull-down menu, choose Enable and Store Files to Image. 10. Click <-- Store. You may see two different continue confirmation dialog boxes relating to communication disruptions and erasure of the current contents of the storage card. If okay, click Yes on either dialog box. 11. RSLogix 5000 software will go to the Offline state, and the following dialog box will appear.
公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
