产品内容介绍
HONEYWELL 10266S-1-020-200-1-0-00000-100-00控制器
使用带有RSLogix 5000的自动设备配置（ADC）软件，20.00或更高版本自动设备配置（ADC）是一个“RSLogix 5000软件，版本20.00或更高版本，支持自动下载配置的功能数据这在Logix控制器建立EtherNet/IP网络后发生连接到PowerFlex 750系列驱动器，固件版本4.001或更高版本，以及其相关外围设备。
RSLogix 5000软件16.00或更高版本的项目（.ACD文件）包含项目中任何PowerFlex驱动器的配置设置。当项目下载到Logix控制器，这些设置也会被传输并驻留在控制器的内存中。
在RSLogix 5000软件中使用ADC之前版本20.00，下载PowerFlex 750系列驱动器配置数据是手动过程，其中用户将打开相应驱动器中的驱动器选项卡RSLogix 5000软件中的附加配置文件（AOP），然后单击下载图标。
RSLogix 5000软件（20.00版或更高版本）中的ADC现在可以自动执行该过程并节省用户时间。它在更换驱动器时特别有用生产线停机时的情况。
ADC还可以与固件主管协同工作。如果固件主管为驱动器设置并启用（必须使用“完全匹配”键），则驱动器/外围设备将在任何ADC之前自动升级（如有必要）该端口的操作。版本4.01驱动器附加配置文件（AOP）RSLogix 5000软件20.00版随4.01版驱动器附加模块一起提供配置文件（AOP）。
使用版本时请注意以下ADC操作状态4.01驱动器AOP：
•添加新驱动器时，默认情况下会为符合以下条件的任何驱动器启用ADC支持ADC，例如固件为7.001或更高版本的PowerFlex 753驱动器，或固件为4.001或更高版本的PowerFlex 755驱动器。
•将RSLogix 5000项目版本16.00…19.00转换为版本时20.00个项目（4.01版驱动器AOP），ADC将由任何支持ADC的驱动器的默认值，如PowerFlex 753驱动器固件7.001或更高版本，或固件4.001的PowerFlex 755驱动器或更高版本。Logix“拥有”驱动器的配置。ADC将在任何情况下触发Logix控制器检测到配置签名不匹配的时间建立EtherNet/IP网络I/O连接时。
使用其他配置工具，如HIM、DriveExplorer软件或DriveTools SP软件应最小化并限制为仅用于监视操作。
这些工具所做的任何配置更改都将导致配置下次Logix控制器连接到设备时签名不匹配ADC将覆盖其他工具所做的任何更改。
考虑使用写入掩码功能（驱动器参数888-[Write Mask Cfg]）以防止连接到除嵌入式EtherNet/IP端口以外的其他端口的工具PowerFlex 755驱动器写入驱动器。任何驱动器配置更改应使用RSLogix 5000附加配置文件（AOP）创建。
Using Automatic Device Configuration (ADC) with RSLogix 5000
Software
Version 20.00 or Later Automatic Device Configuration (ADC) is an ‘RSLogix 5000 software, version 20.00 or later, feature’ that supports the automatic download of configuration data. This occurs after the Logix controller establishes an EtherNet/IP network connection to a PowerFlex 750-Series drive, firmware revision 4.001 or later, and its associated peripherals. An RSLogix 5000 software, version 16.00 or later, project (.ACD file) contains the configuration settings for any PowerFlex drives in the project. When the project is downloaded to the Logix controller, these settings are also transferred and reside in the controller’s memory. Prior to ADC in RSLogix 5000 software version 20.00, downloading PowerFlex 750-Series drive configuration data was a manual process where the user would open the Drive tab in the respective Drive Add-on Profile (AOP) in RSLogix 5000 software and click the Download icon. ADC in RSLogix 5000 software, version 20.00 or later, now automates the process and saves the user time. It is particularly beneficial in a drive replacement situation when a production line is down. ADC can also work in tandem with Firmware Supervisor. If Firmware Supervisor is set up and enabled for a drive (“Exact Match” keying must be used), the drive/ peripheral will be automatically upgraded (if necessary) prior to any ADC operation for that port.
Version 4.01 Drive Add-on Profiles (AOPs)
RSLogix 5000 software, version 20.00 ships with version 4.01 Drive Add-on Profiles (AOPs). Note the following ADC operating status when using version 4.01 Drive AOPs: • When adding a new drive, ADC is enabled by default for any drive that supports ADC, such as PowerFlex 753 drives with firmware 7.001 or later, or PowerFlex 755 drives with firmware 4.001 or later. • When converting RSLogix 5000 projects, version 16.00…19.00, to version 20.00 projects (with version 4.01 Drive AOPs), ADC will be enabled by default for any drive that supports ADC, such as PowerFlex 753 drives with firmware 7.001 or later, or PowerFlex 755 drives with firmware 4.001 or later.Logix ‘owns’ the configuration of the drive. ADC will be triggered any time the Logix controller detects a configuration signature mismatch when establishing an EtherNet/IP network I/O connection. The use of other configuration tools, such as a HIM, DriveExplorer software, or DriveTools SP software, should be minimized and restricted to monitor-only operation. Any configuration changes made by these tools will cause a configuration signature mismatch the next time the Logix controller connects to the device and ADC will write over any changes made by the other tools. Consider using the Write Mask function (drive Parameter 888 - [Write Mask Cfg]) to prevent tools connected to ports other than the Embedded EtherNet/IP port in a PowerFlex 755 drive from writing to the drive. Any drive configuration changes should be made with the RSLogix 5000 Add-on Profile (AOP).
公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
