产品细节介绍
COLMAN 41AA-23003-212-3-00控制器
程序员版本要求
▪ 必须使用Proficy Machine Edition Logic Developer 5.8或更高版本执行EGD交换和冗余传输列表的运行模式存储。
▪ Proficy Machine Edition Logic Developer 5.7或更高版本必须用于5.00版的新功能
▪ Proficy Machine Edition Logic Developer 5.5 Service Pack 2或更高版本必须用于4.00版的新功能。
▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3或更高版本必须
用于为Modbus/TCP服务器操作的CPU编程。
SRTP和EGD性能与90-70系列不同
RX7i中的SRTP和EGD性能与90-70系列略有不同。
每个RX7i以太网接口支持更多SRTP连接和EGD交换。
还请注意，RX7i目前有几个SRTP和EGD运行与Series 90-70相比的限制。迁移Series 90.70时RX7i的以太网应用程序，请仔细阅读“以太网操作注释”第18页。
Series 90-70 LAN接口模块（IC697CMM741和IC697CMM742）不受支持通过RX7i
请注意，Series 90-70 LAN接口模块（IC697CMM741和IC697CMM742）不受RX7i支持，不应放置在RX7i机架。RX7i CPU包含嵌入式以太网接口。
如果附加需要以太网接口，RX7i以太网模块（IC698ETM001）应该使用。
CIMPLICITY*工厂版
版本要求CIMPLICITY Plant Edition 6.1 Service Pack 1a，带更新040204_s90tcp_6101或Service Pack 2或更高版本必须用于与PAC系统。
控制器消耗EGD数据UDP校验和错误客户报告PLC正在使用UDP错误的EGD数据校验和。
在早期版本中，当加速模式设置为ON（默认）时，未验证UDP校验和以减少过载。
以太网固件6.20实现了一种允许计算校验和的方法当加速模式设置为ON而不影响性能时。
控制器没有响应TOS/QOS已配置客户报告，当配置TOS/QOS位时控制器没有响应。
固件已更正为继续当其他设备使用TOS/QOS位时进行通信。回应帧将TOS/QOS位设置为0。
SRTP通信问题当快速打开和关闭多个连接时，以太网接口可能进入阻止远程客户端连接的状态使用SRTP通信。这已在以太网固件中纠正版本6.20。
Programmer Version Requirements
▪ Proficy Machine Edition Logic Developer 5.8 or later must be used to perform Run-mode Store of EGD exchanges and Redundancy Transfer Lists. ▪ Proficy Machine Edition Logic Developer 5.7 or later must be used for Release 5.00 new features ▪ Proficy Machine Edition Logic Developer 5.5 Service Pack 2 or later must be used for Release 4.00 new features. ▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3 or later must be used to program the CPU for Modbus/TCP Server operation. SRTP and EGD Performance Differs from Series 90-70 SRTP and EGD performance in the RX7i differs slightly from the Series 90-70. Each RX7i Ethernet Interface supports a greater number of SRTP connections and EGD exchanges. Please also note that the RX7i currently has several SRTP and EGD operational restrictions when compared to the Series 90-70. When migrating Series 90-70 Ethernet applications to the RX7i, please carefully read the "Ethernet Operational Notes” section on page 18. Series 90-70 LAN Interface Modules (IC697CMM741 and IC697CMM742) not supported by RX7i Please note that the Series 90-70 LAN Interface Modules (IC697CMM741 and IC697CMM742) are not supported by the RX7i and should not be placed in an RX7i rack. The RX7i CPU contains an embedded Ethernet Interface. If additional Ethernet Interfaces are required, the RX7i Ethernet Module (IC698ETM001) should be used. CIMPLICITY* Plant Edition Version Requirements CIMPLICITY Plant Edition 6.1 Service Pack 1a with Update 040204_s90tcp_6101 or Service Pack 2 or later must be used for Ethernet communications with PACSystems.
Controller consumed EGD data with bad UDP checksum
Customer reported that the PLC is consuming EGD data with bad UDP checksum. In previous releases, while acceleration mode is set to ON (default), the UDP checksum was not validated to reduce the overload. Ethernet firmware 6.20 implements a method that allows checksums to be calculated when acceleration mode is set to ON without impacting performance. Controller did not respond when TOS/QOS were configured Customers reported that when TOS/QOS bits are configured, then the Controller does not respond. The firmware has been corrected to continue to communicate when TOS/QOS bits are used by other devices. The response frame will set the TOS/QOS bit to 0. SRTP communication issue When multiple connections were opened and closed very quickly, the Ethernet interface could enter a state that prevented remote clients from connecting using SRTP communications. This has been corrected in Ethernet firmware version 6.20.
公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
4：一对一服务
公司主营范围简介
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件、欧美进口模块。
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
