公司主营产品图展示
产品优势
1：国外专业的供货渠道，具有价格优势
2：产品质量保证，让您售后无忧
3：全国快递包邮
产品详情介绍
SCHROFF MPS022直流电源供应器
XVME-660定制BIOS的设计旨在超越提供的功能普通PC。此自定义BIOS允许您访问XVME-660模块，无需直接与硬件接口。在BIOS设置菜单中导航在启动期间、内存测试之后和系统加载之前，按F2键访问BIOS设置菜单。启动后可能需要重复按F2键。按＜F2＞键输入设置提示可能会出现（取决于BIOS设置），但会显示只是简短的。要选择项目，请使用箭头键将光标移动到所需的字段，并使用输入键以选择子菜单（如有）（由三角形符号表示）。然后使用＜+＞和＜-＞键或F5和F6键选择该字段的值。命令退出菜单允许您保存新值。
BIOS设置菜单使用颜色编码。字段为蓝色，但当前选定的字段为绿色。用户可配置字段值在括号中，为黑色。在不同菜单上受用户影响的值在括号中，为蓝色。设置小时（HH）、分钟（MM）和秒（SS）的实时时钟。时间是根据24小时军用时钟（00:00:00至23:59:59）计算。使用标签或按ENTER键向右移动光标，按SHIFT-TAB键向左移动光标。使用数字键，0-9来改变字段值。不需要输入秒或在中键入零数字前面。IDE主、次主和从子菜单IDE主、次主和从子菜单用于配置IDE设备信息。如果只有一个设备连接到其中一个IDE适配器，则需要输入主子菜单中的参数。如果连接了两个设备：
一个IDE适配器，需要输入主和从子菜单参数。全部的四个子菜单包含相同的信息。
IDE辅助主机用于紧凑型闪存适配器
IDE次要从属设备未连接，因此不应使用。
下面的屏幕显示了所有可能的字段。因此，它不是一个配置它实际上会出现。屏幕上的字段根据在中选择的选项进行更改键入字段。显示设备类型。选项包括无、IDE可移除、ATAPI可移除，CD-ROM、其他ATAPI、用户和自动。自动选项使系统自动打字每次启动时，显示设置；它不允许您编辑其余字段。
自动选项（默认值）使系统填写其他字段值。这个用户选项允许用户填写其他字段。其他选项允许用户：配置其他IDE设备。
The XVME-660 customized BIOS is designed to surpass the functionality provided for
normal PCs. This custom BIOS allows you to access the value-added features on the
XVME-660 module without interfacing to the hardware directly.
Navigating through the BIOS Setup Menus
Press F2 during bootup after the memory tests and before the system loads to access the
BIOS setup menus. You may need to press F2 repeatedly after boot up. A Press <F2>
to enter SETUP prompt may appear (depending on BIOS settings), but will be shown
only briefly. To select an item, use the arrow keys to move the cursor to the field you want and use the
ENTER key to select a submenu, if any (indicated by a triangle bullet, ). Then use the
<+> and <–> keys or the F5 and F6 keys to select a value for that field. The commands in
the Exit menu allow you to save the new values.
The BIOS setup menus use color-coding. The fields are blue, except for the currently selected field, which is green. User-configurable field values are in brackets and are black.
Values that can be affected by the user on a different menu are in brackets and are blue. Sets the real-time clock for hour (HH), minute (MM), and seconds (SS). The hour is
calculated according to the 24 hour military clock (00:00:00 through 23:59:59). Use TAB
or ENTER to move the cursor right, and SHIFT-TAB to move it left. Use the number keys,
0-9, to change the field values. It is not necessary to enter the seconds or type zeros in
front of numbers. IDE Primary and Secondary Master and Slave Submenus
The IDE Primary and Secondary Master and Slave submenus are used to configure IDE
device information. If only one device is attached to one of the IDE adapters, then only
the parameters in the Master Submenu need to be entered. If two devices are connected to
one IDE adapter, both Master and Slave Submenu parameters will need to be entered. All
four submenus contain the same information.
The IDE Secondary Master is used for the Compact Flash adapter. The IDE Secondary
Slave is not connected, and so should not be used.
The screen below shows all possible fields. Because of this, it is not a configuration that
would actually appear. The fields on the screen change based on the option chosen in the
Type field. Displays the type of device. Options include None, IDE Removable, ATAPI Removable,
CD-ROM, Other ATAPI, User, and Auto. The Auto option causes the system to autotype
at each boot and display the settings; it does not allow you to edit the remaining fields.
The Auto option (the default value) causes the system to fill in the other field values. The
User option allows the user to fill in the other fields. The other options allow the user to
configure other IDE devices.
