A6140模拟输出模块
更改设置设置分为六组。
•系统配置
•设置调整
•控制增益
•分析
•保护/继电器
•计量/操作
每个设置组都有一个相应的工具栏按钮，可以选择该按钮访问该组设置。单击菜单栏上的屏幕，然后从列表中选择所需的设置组。访问设置组后，单个设置可以查看和更改组的。
通过在设置字段中单击并键入新设置来更改设置。a的范围限制双击设置可以查看设置。完成所有所需设置更改后在设置组屏幕上，在查看其他屏幕之前，必须将设置发送到DECS-100。
否则，设置更改将丢失。设置更改可通过单击发送至DECS-100SendToDECS按钮。还可以通过单击“通信”将设置发送到DECS-100菜单栏，然后单击发送到DECS。
发送和接收设置
当通信启用时，DECS-100设置可通过BESTCOMS发送或接收。发送设置通过单击SendToDECS按钮将设置更改发送到DECS-100。这导致当前设置屏幕上显示的选定设置将变为DECS-100设置。设置可以也可以通过单击菜单栏上的“通信”并单击“发送到”发送到DECS-100德克斯。此外，输入新值后，按Enter键可发送设置。这个每次设置更改为后，必须单击SendToDECS按钮或按下Enter键确保将所有设置发送到DECS-100。请参阅将设置保存到DECS-100内存有关删除操作电源后保留DECS-100设置的信息。
接收设置通过单击GetFromDECS按钮检索DECS-100设置。这将导致当前设置
显示在设置屏幕上的DECS-100。通过单击菜单栏上的通信并单击从DECS获取，也可以从DECS100接收设置。将设置保存到DECS-100内存
设置保存在非易失性存储器（EEPROM）中。在断电的情况下，以下是设置
它们在加电时激活。如果设置被更改并发送到DECS-100，但未发送到EEPROM，如果DECS-100操作电源丢失，更改的设置将丢失。退出BESTCOMS或关闭时
通信时，会询问您是否要将设置保存到EEPROM。这个问题甚至被问到如果未进行设置更改。
当通信启用时，通过单击EEPROM将设置更改保存到EEPROM
按钮退出时，还可以通过对话框将设置保存到EEPROM最佳通信或关闭通信。
CHANGING SETTINGS
Settings are arranged into six groups.
• System Configuration
• Setting Adjustments
• Control Gain
• Analysis
• Protection/Relay
• Metering/Operation
Each setting group has a corresponding toolbar button that can be selected to access that group of
settings. The six setting groups can also be accessed by clicking Screens on the menu bar and then
selecting the desired setting group from the list. Once a setting group is accessed, the individual settings
of the group can be viewed and changed.
A setting is changed by clicking within the setting field and typing the new setting. The range limits of a
setting can be viewed by double-clicking the setting. Once all desired setting changes have been made
on a setting group screen, the settings must be sent to the DECS-100 before viewing other screens.
Otherwise, the settings changes will be lost. Settings changes can be sent to the DECS-100 by clicking
the SendToDECS button. Settings can also be sent to the DECS-100 by clicking Communications on
the menu bar and clicking Send To DECS. SENDING AND RECEIVING SETTINGS
When communication is enabled, DECS-100 settings can be sent or received through BESTCOMS.
Sending Settings
Settings changes are sent to the DECS-100 by clicking the SendToDECS button. This causes the
selected setting displayed on the current settings screen to become the DECS-100 setting. Settings can
also be sent to the DECS-100 by clicking Communications on the menu bar and clicking Send To
DECS. Additionally, a setting can be sent by pressing the Enter key after the new value is typed in. The
SendToDECS button must be clicked or the Enter key must be pressed after each setting change to
ensure that all settings are sent to the DECS-100. See Saving Settings to DECS-100 Memory for
information about retaining DECS-100 settings after operating power is removed.
Receiving Settings
DECS-100 settings are retrieved by clicking the GetFromDECS button. This causes the current settings
of the DECS-100 to be displayed on the settings screen. Settings can also be received from the DECS100 by clicking Communications on the menu bar and clicking Get From DECS.
Saving Settings to DECS-100 Memory
Settings are saved in nonvolatile memory (EEPROM). In the event of a power loss, these are the settings
that are active at power up. If settings are changed and sent to the DECS-100, but not sent to EEPROM,
the changed settings are lost if DECS-100 operating power is lost. When exiting BESTCOMS or closing
communication, you are asked if you want to save the settings to EEPROM. This question is asked even
if no settings changes were made.
When communication is enabled, setting changes are saved to EEPROM by clicking the EEPROM
button. The opportunity to save settings to EEPROM is also given through a dialog box when exiting
BESTCOMS or closing communication.
