3BSE018114R1底座模块
IND780终端具有以下功能和版本：•用于安全区域和某些危险位置的基本称重终端
•面板安装或粗糙的台式/壁挂式外壳•最多可连接四个刻度通道和计量正确和•每个终端最多支持16个350Ω模拟称重传感器，最多支持8个每个刻度通道350Ω模拟称重传感器
•320 x 240像素图形，单色背光LCD或320 x 240象素背光，有源TFT，彩色LCD，具有显示重量的能力
高达34毫米；交替多通道显示•带备用电池的实时时钟
•两个串行端口（RS232和RS232/422/485），用于异步、双向通信和打印输出
•10/100 Base-T以太网端口
•USB主机•100–240 VAC电源输入范围
•支持以下选项板：⎯ 模拟称重传感器接口⎯ IDNet规模接口
⎯ POWERCELL®接口⎯ 串行通信
⎯ 离散I/O接口⎯ Allen-Bradley®里约界面
⎯ PROFIBUS®-DP接口⎯ 控制网™ 界面
⎯ 以太网IP®
•基本称重功能，包括秤选择、零点、皮重和打印
•单量程或多量程或区间称重
•每个刻度通道的速率计算，可选择重量和时间单位
•可选择带有图形的上/下分类操作模式
•可选材料传输模式
•SmartTrac™ 图形显示
•两个存储表，用于存储皮重和目标值
•单元切换，包括自定义单元
•最多可存储256000条记录的不在场证明存储器
•累计重量的总计和小计寄存器
•十个可定制的打印模板和报告打印
•TraxDSP™ 模拟称重传感器的数字滤波
•TraxEMT™ 性能监测和记录，包括基于网络的工具
•具有5点线性化的传统校准
•无钙™ 无测试砝码的校准
•步骤校准程序
The IND780 terminal is available with the following capabilities and versions:
• Basic weighing terminal used in safe areas and in certain hazardous locations
• Panel Mount or harsh desk/wall-mount enclosures
• Connection for up to four scale channels and a metrologically correct sum
• Support for up to sixteen 350Ω analog load cells per terminal with up to eight
350Ω analog load cells per scale channel
• 320 x 240 pixel graphic, monochrome backlit LCD or 320 x 240 pixel backlit,
active TFT, color LCD with the capability of displaying weight with characters as
large as 34 mm high; alternate multiple channel display
• Real-time clock with battery backup
• Two serial ports (RS232 and RS232/422/485) for asynchronous, bidirectional
communication and print output
• 10/100 Base-T Ethernet port
• USB Master • 100–240 VAC power input range
• Support for the following option boards:
⎯ Analog Load Cell interface ⎯ IDNet Scale interface
⎯ POWERCELL® interface ⎯ Serial communications
⎯ Discrete I/O interface ⎯ Allen Bradley® RIO
interface
⎯ PROFIBUS®-DP interface ⎯ ControlNet™ interface
⎯ EtherNet IP®
• Basic weighing functions including scale selection, zero, tare, and printing
• Single or multiple range or interval weighing
• Rate calculation for each scale channel with selectable weight and time units
• Selectable over/under classifying mode of operation with graphics
• Selectable material transfer mode
• SmartTrac™ graphical display
• Two memory tables for storage of Tare and Target values
• Unit switching, including custom units
• Alibi memory storage for up to 256,000 records
• Grand total and subtotal registers for accumulating weight
• Ten customizable print templates and report printing
• TraxDSP™ digital filtering for analog load cells
• TraxEMT™ performance monitoring and recording, including web-based tools
• Traditional Calibration with 5-point linearization
• CalFREE™ calibration without test weights
• Step Calibration procedure
