主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
HONEYWELL 51403645-100采集信号卡件
热插拔到ExpressCard插槽。此设置仅适用于以下情况：ExpressCard热插拔资源设置为已启用。默认
此设置的值为4096字节的I/O空间。
•内存此设置决定内存空间的大小，以由BIOS为PCI-PCI网桥保留的字节热插拔到ExpressCard插槽中。此设置仅适用如果ExpressCard热插拔资源设置为已启用。默认此设置的值为32 MB内存。
•预取内存：此设置决定将由可热插拔到ExpressCard中的PCI-PCI桥的BIOS狭槽此设置仅适用于ExpressCard热插拔资源设置为已启用。此设置的默认值为：32兆字节的可预取内存。PXI设置菜单使用此菜单控制和路由PXI背板上的某些信号。
通常，您不需要修改这些设置。然而，其他本手册的章节可能表明需要进行修改并且可能导致不可预测的行为。•APIC路由：此项仅适用于Windows XP和2000以及其他现代操作系统。选择启用以初始化单处理器模式下的IOAPIC和本地APIC。选择“禁用”以使用中断路由的传统PIC。默认设置已启用。
•PIRQx路由：此设置选择PXI/PCI的路由选项
连接到PIRQx的设备。此设置会影响不使用的操作系统
APIC路由。所有PIRQx选项的默认设置为IRQ10。
•每个插槽设备设置：此设置将打开每个插槽设备设置子菜单。请参阅每个插槽设备设置子菜单部分
每个插槽设备设置子菜单
使用此菜单配置可针对单个PCI修改的选项PXI机箱中的设备。
注意：不能禁用在PCI桥后面的设备上扫描选项ROM。
PCI设备x选项ROM扫描此设置选择是否使用PCI
将扫描设备x的选项ROM。将此选项设置为已启用
允许BIOS扫描此PCI设备上的PCI选项ROM。
hot-plugged in the ExpressCard slot. This setting is only applicable if
ExpressCard Hot-Plug Resources is set to Enabled. The default
value for this setting is 4096 bytes of I/O space.
• Memory—This setting determines the amount of memory space, in
bytes, that will be reserved by the BIOS for PCI-PCI bridges that may
be hot-plugged in the ExpressCard slot. This setting is only applicable
if ExpressCard Hot-Plug Resources is set to Enabled. The default
value for this setting is 32 megabytes of memory.
• Pre-fetchable Memory—This setting determines the amount of
pre-fetchable memory space, in bytes, that will be reserved by the
BIOS for PCI-PCI bridges that may be hot-plugged in the ExpressCard
slot. This setting is only applicable if ExpressCard Hot-Plug
Resources is set to Enabled. The default value for this setting is
32 megabytes of pre-fetchable memory.
PXI Setup Menu
Use this menu to control and route certain signals on the PXI backplane.
Normally, you do not need to modify these settings. However, other
sections of this manual may indicate that modifications are necessary
and may lead to unpredictable behavior.
• APIC Routing—This item is valid only for Windows XP and 2000
and other modern operating systems. Select Enabled to initialize the
IOAPIC and local APIC in uniprocessor mode. Select Disabled to use
the legacy PIC for interrupt routing. The default setting is Enabled.
• PIRQx Routing—This setting selects the routing option for PXI/PCI
devices connected to PIRQx. This settings affects OSes that do not use
APIC routing. The default setting for all PIRQx options is IRQ10.
• Per-Slot Device Settings—This setting brings up the Per-Slot Device
Settings submenu. Refer to the Per-Slot Device Settings Submenu
section.
Per-Slot Device Settings Submenu
Use this menu to configure options that can be modified for individual PCI
devices in a PXI chassis.
Note Scanning for Option ROMs on devices behind a PCI bridge cannot be disabled.
PCI Device x Option ROM Scan—This setting selects whether PCI
device x will be scanned for an option ROM. Setting this option to Enabled
allows the BIOS to scan for a PCI option ROM on this PCI device. Setting
