主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
HONEYWELL MP-DNCF02-200,模拟量模块
高级设置菜单此菜单包含通常不需要的BIOS设置修改如果您有特定问题，如无法启动磁盘或资源冲突，您可能需要检查这些设置。高级设置菜单包括以下设置：•重置配置数据——EEPROM的一部分控制器被指定为扩展系统配置数据区域（ESCD）。BIOS和即插即用操作系统使用
此表用于存储系统的上次已知良好配置外围设备。如果您遇到资源冲突或外围设备故障，将此设置设置设置为是以强制BIOS重新创建下次重新启动时使用ESCD。这很少是必要的。
•集成外围设备：使用此设置启动集成设备外围设备子菜单。（请参阅集成外围设备子菜单部分。）
•启用此选项时的快速启动模式，一定会很长
忽略很少失败的BIOS测试，以缩短控制器引导时间。默认值已启用。
•摘要屏幕：该设置控制摘要的显示
该屏幕在BIOS完成初始化后显示，但之前启动发生。您可以出于以下目的禁用此屏幕：
缩短控制器启动时间。
默认设置为禁用。
•PXE网络启动：此设置启用从启动的选项子网上的网络PXE服务器。默认设置为禁用。
集成外围设备子菜单使用此子菜单将非默认配置应用于前面板
NI PXI-8105控制器的外围设备。通常，您不需要要修改这些设置，因为出厂默认设置提供了兼容和优化配置是可能的。•串行端口A—此设置启用或禁用COM1。您还可以
将此设置更改为已启用，并修改基址和端口的中断请求级别（IRQ）。默认值为自动，其中
将COM1置于0x3F8 IRQ 4。
•并行端口使用此设置启用或禁用LPT1。您还可以将该设置更改为启用并修改基地址，IRQ级和ISA直接内存访问（DMA）信道默认值为自动，它将LPT1设置为0x378，IRQ 7，使用ISA DMA信道3（如有必要）。
•并行端口模式：PC行业创造了几种不同的模式多年来该港口的运营模式。通常，默认设置适用于所有应用程序。但是，如果是并行端口设备特别需要非默认设置，您可以在此处更改。
对于完整的IEEE 1284功能，默认为双向。
The Advanced setup menu includes the following settings: • Reset Configuration Data—A portion of the EEPROM on the controller is designated as the Extended System Configuration Data region (ESCD). The BIOS and Plug-and-Play operating systems use this table to store the Last Known Good configuration of system peripherals. If you experience resource conflicts or peripheral malfunction, set this setting to Yes to force the BIOS to recreate the ESCD on the next reboot. This is rarely necessary. • Integrated Peripherals—Use this setting to bring up the Integrated Peripherals submenu. (Refer to the Integrated Peripherals Submenu section.) • Quick Boot Mode—When you enable this option, certain lengthy BIOS tests that rarely fail are skipped to shorten controller boot time. The default is Enabled. • Summary Screen—This setting controls the display of the summary screen shown after BIOS completes its initialization, but before booting takes place. You can disable this screen in the interest of shortening controller boot time. The default is Disabled. • PXE Network Boot—This setting enables the option for booting from a network PXE server on the subnet. The default is Disabled. Integrated Peripherals Submenu Use this submenu to apply nondefault configurations to the front panel peripherals of an NI PXI-8105 controller. Normally, you do not need to modify these settings, as the factory default settings provide the most compatible and optimal configuration possible. • Serial Port A—This setting enables or disables COM1. You also can change this setting to Enabled and modify the base address and Interrupt Request Level (IRQ) of a port. The default is Auto, which places COM1 at 0x3F8 IRQ 4. • Parallel Port—Use this setting to enable or disable LPT1. You also can change this setting to Enabled and modify the base address, IRQ level, and ISA Direct Memory Access (DMA) channel of the port. The default is Auto, which places LPT1 at 0x378, IRQ 7, using ISA DMA Channel 3 if necessary. • Parallel Port Mode—The PC industry has created several different modes of operation for this port over the years. Usually, the default setting works for all applications. However, if a parallel port device specifically requires a nondefault setting, you can change it here. The default is Bidirectional, for full IEEE 1284 capabilities.
