主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
HONEYWELL 51196655-100卡件
•使用合适的运输设备。
•如果冲击和振动过大，则使用减震支架这可能发生在运输过程中。
•静电危险部件（如插入式模块）只能在导电包装中运输。
•储存和运输的允许温度范围：-30°C至+85°C
•储存在干燥、无尘和无震动的地方。
•静电危险部件（如插入式模块）只能在导电包装中运输。送货单和条形码贴纸
送货单按名称列出了整个送货的商品订单名称。
有条形码贴纸，用于在控制器的封装。安装导轨支撑整个驱动组件。能够承担
产生的力，必须至少在第二个槽使用M5螺钉。
由于安装导轨还进行了驱动器，安装轨道和安装之间必须有良好的接触
面板因此，可能有必要清除安装区域内的面板使用下边缘的接地夹建立接地连接控制器的。
•电源连接的直流母线连接必须在装置的下侧以及与相邻装置或电源的电源连接必须建立一个单位。
•使用集成扁平带将母线连接至相邻装置
缆绳•将X2或X3扁平带状电缆连接至相关控制连接。
•用保护导体和屏蔽连接电机电源电缆。
•连接电机温度传感器和保持制动器（可选）。如果控件未提供所需参数：
制造商，则有必要在控制装置的机器参数块：指定电流为rms值。
MP 2180：PWM频率。
功率部分的标准开关频率等于：4000Hz。
如果某些应用程序需要不同的频率，则允许的标称电流必须在上述中线性插值指定范围。
MP 2190：直流母线电压。直流母线电压必须根据所使用的电源单元输入。
• Use suitable transportation equipment.
• Use shock-absorbent supports if excessive shocks and vibrations
could occur during transport.
• Electrostatically-endangered parts (e.g., plug-in modules) may only be
transported in conductive packaging.
• Permissible temperature range for storage and transport: -30° C to
+85° C
• Store dry, dust and shock free.
• Electrostatically-endangered parts (e.g., plug-in modules) may only be
transported in conductive packaging.Delivery Slip and Barcode Sticker
The delivery slip lists the merchandise of the entire delivery by name and
order designation.
There are barcode stickers which identify the delivery itself on the
packaging of the controller.Mounting rails support the entire drive package. To be able to take up the
generated forces, it is necessary to fasten the rails in at least every
second slot using an M5 screw.
As the mounting rails also conduct the potential compensation of the
drives, there must be good contact of the mounting rails and the mounting
panel. Therefore, it may be necessary to remove any paints or finishes on
the panel within the area of mounting!• Establish a ground connection with a grounding clip on the lower edge
of the controller.
• DC bus connection for the power connections must be released on the
underside of the unit and power connection to adjacent unit or supply
unit must be established.
• Close bus connection to adjacent unit using the integrated flat-ribbon
cable.
• Connect flat-ribbon cables of X2 or X3 to relevant control connection.
• Connect motor power cable with protective conductor and shield.
• Connect motor temperature sensor and holding brake (optional).If the required parameters have not been made available by the control
manufacturer, then it is necessary to make the following entires into the
machine parameter blocks of the controls:The specified currents are rms values.
MP 2180: PWM frequency.
The standard switching frequency of the power section equals
4000Hz.
If some applications need a different frequency, then the values of the
allowed nominal current must be linearly interpolated in the above
specified range.
MP 2190: DC bus voltage.
The DC bus voltage must be entered in terms of the supply unit used.
