主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
Johnson MS-NAE5510-1网络控制器
电气设备培训合格人员：只有经过培训和合格的人员才能使用本设备，或在其附近。如果有足够的人员，则人员是合格的产品装配、安装和操作知识以及了解所有警告和预防措施
本说明中注明的措施。此外，他们应接受培训、指导并有资格切换
电路和设备的通断、接地和根据安全工作规范的要求对其进行标记，以及
常识。他们必须有足够的安全设备，并且受过急救训练。
仅使用制造商批准的备件和附件。
•遵守特定设备的所有安全法规和要求在使用国实践的应用。
•设备设计用于安装在商用机械上。
欧洲国家：参见指令89/392/EEC（机器指南）。•产品文件中给出的环境条件必须：观察。
•仅使用在项目规划手册。
例如，不允许使用以下区域：施工用于人员或货物的起重机、电梯、设备和车辆运输人员、医疗应用、炼油厂、运输危险品、放射性或核应用、应用
对高频、采矿、食品加工、控制敏感保护设备（也在机器中）。
•只有在确保机器（其中产品已安装，符合国家安全要求应用程序的法规和安全规范。
•仅当国家EMC法规规定满足申请。
符合EMC要求的安装说明
可在INDRAMAT文档“驱动器和控制中的EMC”中找到系统”。
机器制造商负责遵守限制国家法规和特定EMC中规定的值申请规定。
欧洲国家：参见指令89/336/EEC（EMC指南）。
U、 美国：见国家电气规范（NEC），国家电气制造商协会（NEMA）和当地建筑规范。用户该设备必须随时参考上述项目。技术数据、连接和操作条件在必须始终遵守产品文档。
Trained and qualified personnel in electrical equipment:
Only trained and qualified personnel may work on this equipment or
within its proximity. Personnel are qualified if they have sufficient
knowledge of the assembly, installation and operation of the product
as well as an understanding of all warnings and precautionary
measures noted in these instructions.
Furthermore, they should be trained, instructed and qualified to switch
electrical circuits and equipment on and off, to ground them and to
mark them according to the requirements of safe work practices and
common sense. They must have adequate safety equipment and be
trained in first aid.
• Only use spare parts and accessories approved by the manufacturer.
• Follow all safety regulations and requirements for the specific
application as practiced in the country of use.
• The equipment is designed for installation on commercial machinery.
European countries: see directive 89/392/EEC (machine guideline).
• The ambient conditions given in the product documentation must be
observed.
• Use only safety features that are clearly and explicitly approved in the
Project Planning manual.
For example, the following areas of use are not allowed: Construction
cranes, Elevators used for people or freight, Devices and vehicles to
transport people, Medical applications, Refinery plants, the transport
of hazardous goods, Radioactive or nuclear applications, Applications
sensitive to high frequency, mining, food processing, Control of
protection equipment (also in a machine).
• Start-up is only permitted once it is sure that the machine, in which the
product is installed, complies with the requirements of national safety
regulations and safety specifications of the application.
• Operation is only permitted if the national EMC regulations for the
application are met.
The instructions for installation in accordance with EMC requirements
can be found in the INDRAMAT document "EMC in Drive and Control
Systems”.
The machine builder is responsible for compliance with the limiting
values as prescribed in the national regulations and specific EMC
regulations for the application.
European countries: see Directive 89/336/EEC (EMC Guideline).
U.S.A.: See National Electrical Codes (NEC), National Electrical
Manufacturers Association (NEMA), and local building codes. The user of
this equipment must consult the above noted items at all times.
• Technical data, connections and operational conditions are specified in
the product documentation and must be followed at all times.
