主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
ASSY 11994R13机械设备卡件
必须对所有继电器重复此步骤。配置文件绘图。TXT不再是必需的，并且不会出现有关丢失桩号文件的错误消息。WINEVE提供了编辑和重新保存所有工作站的功能参数（文本、颜色等）。例外：必须在文件中更改比率TR阴谋。TXT和文件重新导入并再次保存，如上所述将文件“PLOT.TXT”复制到以下目录：C： \SMS\REVAL\EVENTS
REVAL重新读取文件绘图。然而，每次加载干扰记录时，在绘图中指定任何颜色。TXT是忽略。相反，颜色由REVAL指定，可以加载干扰记录后编辑。同步检查功能（同步检查）
检查同步标准（振幅、相移以及频率差），并且如果满足相应的限制，则使它们能够并联连接。B、 特征
监测同步：单相电压测量。
比较两个电压矢量的电压（dU）、相移（dPh）和频率（df）。计算这是一个复杂的平面。
基频分量的评估
电压信号（谐波和直流分量滤波后）。监测电压：单相或三相电压测量。
瞬时值评估（非数字滤波模拟信号），导致较大的允许频率
范围三者中最大和最小的检测三相测量时的相电压。
无谐波或直流分量滤波。母线和线路侧电压I/P的相位选择
（用于振幅和相位角调整）。附加电压I/P（用于双母线站）提供远程切换。
提供操作模式的远程选择。二进制输出：功能拾取（启动）
断路器闭合使能信号（“PermitToClos”）
功能禁用信号（“SyncBlockd”）
启用O/P阻塞信号（TrigBlockd）
同步检查旁路信号（超同步）
允许范围内的振幅差（Amplifok）
允许范围内的最大相位差（相位差）允许范围内的频率差（FreqDifOk）
母线通电（现场总线）母线断电（死母线）线路通电（带电线路）线路断电（截止日期）。
This procedure must be repeated for all the relays. The configuration file PLOT.TXT is no longer necessary and the error message concerning the missing station file does not appear.
WINEVE provides facility for editing and resaving all the station
parameters (texts, colours etc.).
Exception: The ratios TR have to be changed in the file
PLOT.TXT and the file re-imported and saved again as described above.REVAL
Copy the file “PLOT.TXT” to the following directory:
C:\SMS\REVAL\EVENTS
REVAL rereads the file PLOT.TXT every time a disturbance record is loaded, however, any colours specified in PLOT.TXT are
ignored. Instead, the colours are assigned by REVAL and can be
edited after a disturbance record has been loaded.Synchrocheck function (SynchroCheck)
A. Application
Checking the synchronisation criteria (amplitudes, phase-shift
and frequency difference) of two electrical systems and, providing the corresponding limits are satisfied, enabling them to be
connected in parallel.
B. Features
Monitoring synchronism:
Single-phase voltage measurement.
Comparison of the voltages (dU), phase-shift (dPh) and frequencies (df) of two voltage vectors. Calculation of the corresponding differences between the voltage vectors in the
complex plane.
Evaluation of the fundamental frequency components of the
voltage signals (after filtering of harmonic and DC components).
Monitoring voltage:
Single or three-phase voltage measurement.
Evaluation of instantaneous values (non-digitally filtered
analogue signals) resulting in a large permissible frequency
range. Detection of the largest and smallest of the three
phase voltages in the case of three-phase measurement.
No filtering of harmonics or DC component.
Choice of phase for the voltage I/P’s on busbar and line sides
(for amplitude and phase-angle adjustment).
Additional voltage I/P (for use in double busbar stations) with
provision for remote switchover.
Provision for remote selection of the operating mode. Binary outputs:
Function pick-up (Start)
Circuit-breaker closing enable signal (‘PermitToClos’)
Function disabled signal (‘SyncBlockd’)
Enable O/P blocked signal (TrigBlockd)
Synchrocheck bypass signal (OverridSync)
Amplitude difference in permissible range (AmplDifOk)
maxPhaseDif in permissible range (PhaseDifOk)
Frequency difference in permissible range (FreqDifOk)
Busbars energised (LiveBus)
Busbars de-energised (DeadBus)
Line energised (LiveLine)
Line de-energised (DeadLine).
