主营产品
PLC可编程控制器模块，DCS卡件，ESD系统卡件，振动监测系统卡件，汽轮机控制系统模块，燃气发电机备件等，优势品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各种进口工业零部件
产品广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、塑胶机械、电力、水利、水处理/环保、锅炉供暖、能源、输配电等等
ELEMASTER 3110050机器人模块
保护系统的应用中提供了许多不同的保护功能永久存储在RE中的软件。216系统。这个保护特定设备所需的功能可以是单独的选择、激活和设置。特定保护功能可以：可在不同的保护方案中多次使用。如何信号将由中的电厂保护装置处理跳闸、信号和逻辑分配等问题
各种输入和输出的信号也由以下因素决定：适当地配置软件。
系统硬件在结构上是模块化的。数量实际安装的电子设备和I/O单元，例如：
增加保护功能的数量，或出于以下目的：冗余度可以根据特定设备的要求而变化。
由于其模块化设计和选择的可能性通过配置软件实现保护和其他功能
发电机保护REG 216可适用于该保护小型、中型和大型发电机以及大型电动机，电力变压器和馈线，而控制单元REC 216能够进行数据采集、控制和监控在中压和高压变电站中的功能。其他相关文件
系统和电子设备的一般说明
安装的I/O单元和相应的技术数据如下：数据表1MRB52004 Ben“REG 216型和REG 216型紧凑型发电机保护”。每个RE。216保护系统的设计旨在满足相关设备的特殊要求。一组特定的为每个安装提供了图表，其中定义了与安装的电子设备和I/O单元、其位置和内部布线相关的系统。成套设备图包括：保护单线图：完整表示设备的c.t.和v.t.连接到保护
标准电缆连接：方框图显示保护设备布线（电子设备机架至I/O单元）。
保护柜布局：安装和位置电子设备和I/O单元。
电子机架布局：机架内的设备位置。
测量电路（三相设备图）：c.t和v.t与保护的连接。
辅助电源：外部连接和内部配电辅助直流电压源。
I/O信号：外部连接和内部接线跳闸和信号输出以及外部输入信号。
Application of the protection system
A number of different protection functions are provided in the
software permanently stored within the RE. 216 system. The
functions required to protect a specific plant can be individually
selected, activated and set. A particular protection function may
be used several times in different protection schemes. How the
signals are to be processed by the protection for the plant in
question such as the assignment of tripping, signalling and logic
signals to the various inputs and outputs is also determined by
appropriately configuring the software.
The system hardware is modular in structure. The number of
electronic devices and I/O units actually installed, for example, to
increase the number of protection functions or for purposes of
redundancy, can vary according to the requirements of the particular plant.
Because of its modular design and the possibility of selecting
protection and other functions by configuring the software, the
generator protection REG 216 can be adapted for the protection
of small, medium and large generators as well as large motors,
power transformers and feeders, while the control unit REC 216
can perform data acquisition and control and supervision
functions in medium and high-voltage substations.Other relevant documents
A general description of the system and the electronic devices
and I/O units installed and the corresponding technical data are
to be found in data sheet 1MRB520004-Ben "Type REG 216 and
Type REG 216 Compact Generator Protection".
Each RE. 216 protection system is engineered to fulfil the particular requirements of the plant concerned. A specific set of
diagrams is provided for each installation, which defines the
system with respect to the electronic devices and I/O units installed, their locations and the internal wiring.The set of plant diagrams includes:
single-line diagram of the protection: complete representation
of the plant showing the c.t. and v.t. connections to the
protection.
standard cable connections: block diagram showing the
protection equipment cabling (electronic equipment racks to
I/O units).
protection cubicle layout: installation and locations of the
electronic equipment and I/O units.
electronic rack layout: equipment locations within a rack.
measurement circuits (three-phase plant diagram): connection of the c.t's and v.t's to the protection.
auxiliary supply: external connection and internal distribution
of the auxiliary d.c. voltage supply.
I/O signals: external connection and internal wiring of the
tripping and signalling outputs and the external input signals.
